selling the old valve train out of the turbo X275 car. upgraded to jesel shaft mounts. nothing wrong with any of this just not up to par for what we need. very little time on these. these are for trick flow high ports
1.6 comp moly steel roller rockers
7.250" 5/16 by .105 wall barker 1 piece moly push rods
guide plates for high ports with 5/16" push rods
7/16" studs with locks
trick flow stud girdle
valve springs with steel locks and retainers. (not sure on the size here they were to small for our solid roller) 360lbs open pressure at 600 IIRC
asking 460 bucks for everything. the rockers alone are 320 bucks new! PM me if intrested. i will take pictures when i get to the shop tonight.
1.6 comp moly steel roller rockers
7.250" 5/16 by .105 wall barker 1 piece moly push rods
guide plates for high ports with 5/16" push rods
7/16" studs with locks
trick flow stud girdle
valve springs with steel locks and retainers. (not sure on the size here they were to small for our solid roller) 360lbs open pressure at 600 IIRC
asking 460 bucks for everything. the rockers alone are 320 bucks new! PM me if intrested. i will take pictures when i get to the shop tonight.