Homemade Power Pipe; UPR Power Pipe

92GreenGT · Jun 14, 2004

mustangdaren said:
Dave,
Here is the company that I got my 80mm MAF from. The guys name is Alfredo Cross. He has some nice custom aluminum discharge tubes for around $50 also. He told me he is currently working on a custom intercooler for the Vortech supercharger that would be similar to the Procharger intercoolers. As for powerpipes I got a UPR aluminum boostmaster pipe for $150 at Atlanta FFW. If you were not in a hurry you could call and have them bring one to one of the FFW events and just pick it up in person. That is what I did since they normally don't bring the aluminum pipes. That way you could see the aluminum and plastic pipe in person before deciding. They are both nice pieces. The aluminum comes powdercoated silver but could easily be stripped and polished out.

PDI
11615 S.W. 123rd Avenue
Miami, FL 33186
Phone- 305-218-1486
email- p_d_i@bellsouth.net

What does the Aluminum Discharge tube look like from them? Does it have a place where you can use a bypass with it? Thats a nice price, I dont care if its polished or satin. I just want one that I can use a bypass with. I have a old BBK CAI tube that I could probably make one from if its long enough. Ill look into that, do they have a website? Thanks

I know you have to route the air back into the system with our cars, but do those bypass valves make any sort of sound?

Dave

92GreenGT · Jun 14, 2004

bmo37 said:
i bought my boostmaster pipe from upr for $99, and my 80maf from coolblue, my bypass valve is a bosh that I bought from superchargersonline.com for $$99 beans

<img src="http://www.superchargersonline.com/images/productimages/bypass_valve_kit.jpg">

Ok, thanks for all the help.

Dave

Rick 91GT · Jun 14, 2004

When the air re-circulates and doesn't enter the atmoshpere it make no noise....

If you use a intercooler like the ATI's do it will vent out and you can here it even on a MAF car.

The BBK is too small in Diameter...

mustangdaren · Jun 14, 2004

It looks about like the vortech just smooth with no vortech on it and is powdercoated silver. It is threaded for a bypass valve. I thought about getting one and polishing it so I can keep the vortech piece stock in case I don't like the polished one.

92GreenGT · Jun 14, 2004

mustangdaren said:
It looks about like the vortech just smooth with no vortech on it and is powdercoated silver. It is threaded for a bypass valve. I thought about getting one and polishing it so I can keep the vortech piece stock in case I don't like the polished one.

Awesome. I emailed him, does he ship?

Dave

Blk91stang · Jun 27, 2004

92GreenGT said:
Where did you buy your Pro-M at? I emailed a couple of advertisers on Corral and im still waiting for a reply. I believe im going to go ahead and order the UPR Pipe tomorrow.

Dave

I bought my Pro-M from LaRocca's Performance. Another reason I bought it from them is because LaRocca's has their own special calibration which they order from Pro-M. I get my car tuned by him so it made sense and thats what he recommended to me..

BTW- Recieved my UPR powerpipe about a week ago and its well worth the $100!! Fits the 80mm good and fits my blower... Just need to get those damn a/c lines out of the way...

92GreenGT · Jun 27, 2004

Alright, how much did it cost for the 80mm Pro-M from him? I also sent you a PM btw.

Dave

Homemade Power Pipe; UPR Power Pipe

92GreenGT

PEAT

92GreenGT

PEAT

Rick 91GT

Mustang Master

mustangdaren

92GreenGT

PEAT

Blk91stang

Member

92GreenGT

PEAT

Similar threads

Homemade Power Pipe; UPR Power Pipe

92GreenGT

PEAT

92GreenGT

PEAT

Rick 91GT

Mustang Master

mustangdaren

92GreenGT

PEAT

Blk91stang

Member

92GreenGT

PEAT

Similar threads

Privacy & Transparency

Privacy & Transparency