Honda -Tech guy 98 GT hit 13.7 with Bolt-ons ??

B

Black-stang

New Member

Aug 15, 2003

111

0

0

Jun 22, 2004

#1

• Jun 22, 2004

• #1

Ok this guy on Honda-Tech said his 98 NPI GT hit 13.7 with= DR, K&N, ASP Pullies, BBK off road X pipe, Flows. And he has a 100 shot on his car and hit 12 sec. Can a 98 gt do that with out PI Heads and Cams??? I have a 97 gt with full Bolt-ons Svo Heads , SHM Cams, Pro-Charger. I can't see it but could I be wrong What would he make to the wheel with his Mods HP and TQ??

 

T

Too Slow

New Member

Jan 23, 2004

209

0

0

Houston, TX

Jun 22, 2004

#2

• Jun 22, 2004

• #2

i think it could be done if the car has had a good life and you launch the piss out of it. i think he would be dynoing around 200/260

 

2

2002BLGT

Well-Known Member

Dec 18, 2003

2,945

4

59

Bedford VA

Jun 22, 2004

#3

• Jun 22, 2004

• #3

could be done especially if the car is on a diet , weight reduction will give you some good ETs with traction

 

reeber

10 Year Member

Mar 10, 2004

574

26

38

Berlin, NJ

Jun 22, 2004

#4

• Jun 22, 2004

• #4

I ran a 14.40 with my mods spinning the hell out of my tires.. I am waiting for my drag radials to show up.. I should be very close to 13's with that..

 

JLstang351

Founding Member

Jun 26, 2001

528

0

0

atl,ga

Jun 22, 2004

#5

• Jun 22, 2004

• #5

Yea can be done easily. I hit 14.0 in my old 98 gt w/ only O/R H,welded in flows, K&n and 315/35/17 nittos. That car felt a little stronger down low compared to my new 01GT. NPI cars respond pretty well w/ bolt ons. Oh that run was w/ no spare/jack, and fresh oil change.

 

d98gt

Founding Member

Mar 14, 2002

4,505

59

204

SE Texas

Jun 22, 2004

#6

• Jun 22, 2004

• #6

So, you got over a half second with a midpipe,mufflers, and tires?


Basically, the 96-98 5 speeds were pulling 14.6s - 14.7s stock?

 

Ryan02Stang

Active Member

Jun 17, 2003

1,181

0

36

Arlington Heights, Illinois

Jun 22, 2004

#7

• Jun 22, 2004

• #7

984.6GT was running high 13's with a NPI 98 all motor and high 12's with a 100 shot. I'm sure he'll chime in.

 

reeber

10 Year Member

Mar 10, 2004

574

26

38

Berlin, NJ

Jun 22, 2004

#8

• Jun 22, 2004

• #8

JLstang351 said:

Yea can be done easily. I hit 14.0 in my old 98 gt w/ only O/R H,welded in flows, K&n and 315/35/17 nittos. That car felt a little stronger down low compared to my new 01GT. NPI cars respond pretty well w/ bolt ons. Oh that run was w/ no spare/jack, and fresh oil change.

Click to expand...

The fastest I could get my car to go with 2.100 60 FT. times was 15.10 stock.. It took all the mods below to get 14.40 with the same 60FT time.. 14.0 with only H pipe and tires? No way..

 

Ryan02Stang

Active Member

Jun 17, 2003

1,181

0

36

Arlington Heights, Illinois

Jun 22, 2004

#9

• Jun 22, 2004

• #9

In fact...I think you did talk to "984.6GT" Those are his exact mods. If you don't believe him here is his timeslip...

http://forums.modulardepot.com/flyshow.php?&s=&showid=264

 

d98gt

Founding Member

Mar 14, 2002

4,505

59

204

SE Texas

Jun 22, 2004

#10

• Jun 22, 2004

• #10

98 has a P.I motor now ( I think )

 

Ryan02Stang

Active Member

Jun 17, 2003

1,181

0

36

Arlington Heights, Illinois

Jun 22, 2004

#11

• Jun 22, 2004

• #11

d98gt said:

98 has a P.I motor now ( I think )

Click to expand...

He does...out of an '01. But that timeslip was with his NPI.

 

reeber

10 Year Member

Mar 10, 2004

574

26

38

Berlin, NJ

Jun 22, 2004

#12

• Jun 22, 2004

• #12

That does seem about right with the spray.. I am sure he does have a new motor... he'd need one after a few shots of that! His car looks almost identical to mine.. Same rims and everything.. Except, of course, the E.T...

 

Ryan02Stang

Active Member

Jun 17, 2003

1,181

0

36

Arlington Heights, Illinois

Jun 22, 2004

#13

• Jun 22, 2004

• #13

reeber said:

That does seem about right with the spray.. I am sure he does have a new motor... he'd need one after a few shots of that! His car looks almost identical to mine.. Same rims and everything.. Except, of course, the E.T...

Click to expand...

That timeslip is all motor with his NPI motor.

 

B

Black-stang

New Member

Aug 15, 2003

111

0

0

Jun 22, 2004

#14

• Jun 22, 2004

• #14

Ryan02Stang said:

That timeslip is all motor with his NPI motor.

Click to expand...

B.S There is no way a 98 GT ran 13.7 with Pullies , X pipe, DR. So a 99 and up GT will hit 12.7 with the same mods LOL

 

J

Joel's98GT

New Member

Jan 3, 2004

368

0

0

central OH

Jun 22, 2004

#15

• Jun 22, 2004

• #15

*cough* *cough* (raises hand)

http://forums.modulardepot.com/viewet.php?id=2722
14.085@95.11 with absolutley HORRIBLE racing weather. and no wieght reduction other than an empty trunk and 1/3 tank of gas with ricers dragging water on the track.

some good weather at Norwalk and i could make 13.7

Weather makes a huge difference, 984.6GT will be the first to tell you that it won't run 13.7 on any given day. But on a sunny, cool now huhmidity day, on a well prepped track with a good driver? very possible.

the car went 14.30 with a midpipe, shifter and pullies on stock tires and 2.73 gear. on one of those perfect weather days.

 

9

98gt4me

New Member

Apr 3, 2003

32

0

0

Pennsylvania

Jun 22, 2004

#16

• Jun 22, 2004

• #16

i have run a 14.92 @ 92 mph with a 2.0 60' time. My car is bone stock. Its a 98 gt 5 speed. I launched at about 2750 rpms and lightly feathering the clutch with practically no wheel spin.

 

Modular2v

Founding Member

Jun 30, 2002

3,222

23

99

oklahoma

Jun 22, 2004

#17

• Jun 22, 2004

• #17

weather and track prep can take 1/2 a second or more off your E.T

 

JLstang351

Founding Member

Jun 26, 2001

528

0

0

atl,ga

Jun 24, 2004

#18

• Jun 24, 2004

• #18

reeber said:

The fastest I could get my car to go with 2.100 60 FT. times was 15.10 stock.. It took all the mods below to get 14.40 with the same 60FT time.. 14.0 with only H pipe and tires? No way..

Click to expand...

You calling me a liar?? Why would I make this **** up!? It is not hard at all if you know what your doing. Sounds like to me you waisted alot of money if you are only @ 14.40's! My time was with a 2.017 60ft. It was a 9.027 in the 1/8. Took my new 01Gt tonight w/ only exhaust and ran 9.060@79.95mph.YOu going to call me out on that too?