Hood closure 95 GT

a1handy

New Member
Jan 13, 2010
3
0
0
I am replacing the hood on my 95 GT and cannot get it to latch properly. The safety latch will catch but the main latch will not. It also seems to be sitting a little high on the right side when I shut it down. Where should I start the adjustment process to get the hood to shut and latch properly.
 
You have two height adjusters under the two front corners of the hood. They sorta look like a small knob you'd find on a closet door. You can twist them to raise them up and down. Also, you can adjust the latch up and down somewhat. You may also have to slot the holes in the latch to allow it to move enough.
 
it is not the adjusters on the sides of the hood and I have moved the latch as much as possible, I believe you are right that I will have to notch the latch to get more movement
 
I can see where adjusting the fenders would affect the gap between the hood and fenders or the alignment of the height of hood to fender but not the hood to latch. Since the hood is not engaging the latch fully, how could fender adjustment help?