Hood won't latch

Hey guys, tonight I tried to install my VIS Carbon Fiber hood, but I just can not get it to latch.

I do notice that as I close it, the drivers side seems to be higher, but the bump stops are adjusted all the way down and not interfering in any way.

The latch is perfectly functional, and had no problems with the factory hood.

I messed around with it from midnight until 2 am, and now I am kind of giving up for the night. Any Idea's so I know how to attack it in the morning?
 
If you pull off the latch you will see two studs on the back of it, cut them off with a grinder or something and you will be able to raise the latch till the hood shuts. Be careful shutting the hood as vis hoods crack hella easily. Only push down on the very front edge of it. If the hood isnt level in the front you can adjust it by tilting the latch from side to side, or putting shims under the hinges. I spent hours adjusting mine.
 
I see the bolts, but it isn't adjustable. There aren't slots to raise or lower it, just holes to bolt it to?

take off the front 2 bolts and look at the back of it, you will see two studs on the back of it that if you cut off will give you more adjustment. there arent slots but you can still adjust it a little bit because the bolt holes are bigger than the bolts. You can also loosen the bolts that hold the bracket the latch bolts to and pry it up a little bit for another 1/4 inch of adjustment.
 
take off the front 2 bolts and look at the back of it, you will see two studs on the back of it that if you cut off will give you more adjustment. there arent slots but you can still adjust it a little bit because the bolt holes are bigger than the bolts. You can also loosen the bolts that hold the bracket the latch bolts to and pry it up a little bit for another 1/4 inch of adjustment.

Yeah this seems a little to technical. I think I'll take it to whiplash motorsports and when they do my hoodpins they can adjust it. If nothing else, I'll just drive it down there with no hood and have a friend with a truck follow me with the hood tied down in the bed. Thanks for the info though, I do appreciate it, just don't trust myself to do it.