• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-

Hood won't latch

  • Thread starter Thread starter turbomaxx
  • Start date Start date Aug 17, 2008
T

turbomaxx

New Member
Jul 13, 2008
22
0
0
Strasburg, VA (NOVA, 540 crew)
Aug 17, 2008
#1
  • Aug 17, 2008
  • #1
Hey guys, tonight I tried to install my VIS Carbon Fiber hood, but I just can not get it to latch.

I do notice that as I close it, the drivers side seems to be higher, but the bump stops are adjusted all the way down and not interfering in any way.

The latch is perfectly functional, and had no problems with the factory hood.

I messed around with it from midnight until 2 am, and now I am kind of giving up for the night. Any Idea's so I know how to attack it in the morning?
 

superstang01

Active Member
Oct 11, 2006
448
9
29
Kingston, On, Canada
Aug 17, 2008
#2
  • Aug 17, 2008
  • #2
you just need to adjust the latch. If i recall correctly, there was 2 bolts that i removed, they allowed the latch to be raised and lowered!
 
B

blubullett

Member
Jun 22, 2006
535
6
18
Modesto, CA
Aug 17, 2008
#3
  • Aug 17, 2008
  • #3
If you pull off the latch you will see two studs on the back of it, cut them off with a grinder or something and you will be able to raise the latch till the hood shuts. Be careful shutting the hood as vis hoods crack hella easily. Only push down on the very front edge of it. If the hood isnt level in the front you can adjust it by tilting the latch from side to side, or putting shims under the hinges. I spent hours adjusting mine.
 
T

turbomaxx

New Member
Jul 13, 2008
22
0
0
Strasburg, VA (NOVA, 540 crew)
Aug 17, 2008
#4
  • Aug 17, 2008
  • #4
superstang01 said:
you just need to adjust the latch. If i recall correctly, there was 2 bolts that i removed, they allowed the latch to be raised and lowered!
Click to expand...

I see the bolts, but it isn't adjustable. There aren't slots to raise or lower it, just holes to bolt it to?
 
B

blubullett

Member
Jun 22, 2006
535
6
18
Modesto, CA
Aug 17, 2008
#5
  • Aug 17, 2008
  • #5
turbomaxx said:
I see the bolts, but it isn't adjustable. There aren't slots to raise or lower it, just holes to bolt it to?
Click to expand...

take off the front 2 bolts and look at the back of it, you will see two studs on the back of it that if you cut off will give you more adjustment. there arent slots but you can still adjust it a little bit because the bolt holes are bigger than the bolts. You can also loosen the bolts that hold the bracket the latch bolts to and pry it up a little bit for another 1/4 inch of adjustment.
 
T

turbomaxx

New Member
Jul 13, 2008
22
0
0
Strasburg, VA (NOVA, 540 crew)
Aug 17, 2008
#6
  • Aug 17, 2008
  • #6
blubullett said:
take off the front 2 bolts and look at the back of it, you will see two studs on the back of it that if you cut off will give you more adjustment. there arent slots but you can still adjust it a little bit because the bolt holes are bigger than the bolts. You can also loosen the bolts that hold the bracket the latch bolts to and pry it up a little bit for another 1/4 inch of adjustment.
Click to expand...

Yeah this seems a little to technical. I think I'll take it to whiplash motorsports and when they do my hoodpins they can adjust it. If nothing else, I'll just drive it down there with no hood and have a friend with a truck follow me with the hood tied down in the bed. Thanks for the info though, I do appreciate it, just don't trust myself to do it.
 
You must log in or register to reply here.

Similar threads

N
Fox Street Suspension Build Advice
  • NYFox
  • Jan 25, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
442
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 28, 2026
Noobz347
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
464
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
Drivetrain 83’ Glx convertible C5 Trans help!
  • JacksonJared2113
  • Dec 25, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
532
Fox 5.0 Mustang Tech Dec 26, 2025
JacksonJared2113
Considering widening my rear wheels, would like to verify my thoughts on fitment
  • 2000xp8
  • Jul 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
37
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 18, 2026
AeroCoupe
G
Expired 2013 Ford Mustang V6 (Grabber Blue) 3:55 gears... Excellent Condition.
  • Grabberblueguy77
  • Nov 19, 2025
  • S197 Mustangs For Sale (2005-14)
Replies
2
Views
609
S197 Mustangs For Sale (2005-14) Mar 11, 2026
Grabberblueguy77
G
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?