• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

How about this block.

  • Thread starter Thread starter Makdaddymac
  • Start date Start date Jun 26, 2006
M

Makdaddymac

New Member
May 28, 2005
323
1
0
orlando
Jun 26, 2006
#1
  • Jun 26, 2006
  • #1
http://cgi.ebay.com/ebaymotors/FORD...dZViewItemQQcategoryZ33615QQitemZ140001093048

its affordable and i need a block that i can keep rather than having to exchange a core cause i want to get some heads and would need time and money and my stang is my DD.
anyways what would the HP rating be on the motor with stock performance heads.Would it it be better than a stock 302 casue it is bored out a little..or would itbe the same..
 

feifong

New Member
Apr 4, 2005
319
0
0
mesa
Jun 26, 2006
#2
  • Jun 26, 2006
  • #2
not a bad deal wish i woulda bought instead of bsing with my block
 
M

mtbdoc

New Member
Nov 2, 2003
245
1
0
Jun 26, 2006
#3
  • Jun 26, 2006
  • #3
I don't know about this specific builder, but there are a number of reputable builders who are using ebay as an advertising medium. In general, I just don't think it makes sense to have your block redone by the local machinist...FWIW.
 

pb_paulie_b

Founding Member
May 19, 2001
894
0
0
Chaptico, Maryland
Jun 26, 2006
#4
  • Jun 26, 2006
  • #4
It's a good price. The parts look good for a stock replacement engine. As far as the power increase,
225 hp @ 302 ci = .745 hp per ci
so 306 ci x .745 = 228 hp.
 
T

TheUser

Active Member
Jul 25, 2003
1,859
1
36
Springfield, MO
Jun 26, 2006
#5
  • Jun 26, 2006
  • #5
I think it depends on your situation. I have a lot of stuff I can re-use, so I can get my block and heads cleaned up, 3 angle valve job, valve seals, the gaskets I need (already have head gaskets and valve cover gaskets), bearings, oil pump and rings for around $500-550 or I can pay that dude $1049 for a short block w/ forged pistons + 114 shipping, I'm looking at nearly $1200.

If you need a whole new short block, it's probably a good deal (his feedback is good - I went through 4 pages and he has many people who replied w/ positive feedback).
 
R

R2D2

Jun 26, 2006
#6
  • Jun 26, 2006
  • #6
Once you run into a problem, you will find out why its better sometimes to go local instead of having to ship a shortblock on a pallet all the way across the country on your time
 
M

Makdaddymac

New Member
May 28, 2005
323
1
0
orlando
Jun 27, 2006
#7
  • Jun 27, 2006
  • #7
What do you mean. I wanted to rebuild but the cost for that would be about how much this was gonna cost me. i can get this block for about 800.00 shipped. And take my time( i need something to build for a quick swap cause i cant be without my car for too long) As far as problems im not plannning on runnning into any. But if i do then i will have to repair or take care of it locally.
but wouldnt it make more horses than 225+ with stock heads? I do plan on different heads cause i want at least 275ponies out of this thing.
 
R

R2D2

Jun 27, 2006
#8
  • Jun 27, 2006
  • #8
Makdaddymac said:
What do you mean. I wanted to rebuild but the cost for that would be about how much this was gonna cost me. i can get this block for about 800.00 shipped. And take my time( i need something to build for a quick swap cause i cant be without my car for too long) As far as problems im not plannning on runnning into any. But if i do then i will have to repair or take care of it locally.
but wouldnt it make more horses than 225+ with stock heads? I do plan on different heads cause i want at least 275ponies out of this thing.
Click to expand...
what if it slipped through their quality control and you get junk, think it doesnt happen? At the prices listed they are selling a ton of them, mistakes in machining will happen, no doubt about it. What happens when you have to send it back, toss it in a truck on a pallet, drive it to a shipping terminal etc. Good luck
 

srothfuss

Last night I stabbed the same guy 7 times in a row
Oct 17, 2004
1,796
3
0
Woodward Ave.
Jun 27, 2006
#9
  • Jun 27, 2006
  • #9
If you are looking for something on the cheap, it's not a bad idea. I have a local machine shop that quoted me a total of 800 for my rebuild if / when I need it.

There is nothing wrong with going ebay for the right price.

Another option that you should consider is a J/Y explorer V8. wwwmidwestmustangsnet was trying to sell one on ebay (minus intake but with heads) for $400.00 out of kentucky.

As far getting any HP out of a stock rebuild, there is non there to unlock. All of the power potential lies in the heads / cam and induction. [leaving out stroked displacments]
 
You must log in or register to reply here.

Similar threads

F
Ford 460 swap
  • Ford460
  • Sep 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
6
Views
505
1996 - 2004 SN95 Mustang -General/Talk- Sep 14, 2026
Ford460
F
J
Help Figuring Motor Choice(Possible future turbo)?
  • jaygee15
  • Dec 14, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
13
Views
922
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 3, 2026
Jarhead67
J
6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
5
Views
1K
1965 - 1973 Classic Mustangs -General/Talk- Oct 19, 2026
mattcrp1
M
SN95 Desktop 363 Engine Combination - Looking for input
  • WhiteCobra95
  • Sep 8, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 6, 2025
Habu135
Progress Thread Progress Thread- From6to8's 95 GT/Saleen Supercharged 331 install
  • from6to8
  • Mar 22, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
27
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 28, 2026
from6to8
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?