How about this block.

Makdaddymac

New Member
May 28, 2005
323
1
0
orlando
http://cgi.ebay.com/ebaymotors/FORD...dZViewItemQQcategoryZ33615QQitemZ140001093048

its affordable and i need a block that i can keep rather than having to exchange a core cause i want to get some heads and would need time and money and my stang is my DD.
anyways what would the HP rating be on the motor with stock performance heads.Would it it be better than a stock 302 casue it is bored out a little..or would itbe the same..
 
I don't know about this specific builder, but there are a number of reputable builders who are using ebay as an advertising medium. In general, I just don't think it makes sense to have your block redone by the local machinist...FWIW.
 
I think it depends on your situation. I have a lot of stuff I can re-use, so I can get my block and heads cleaned up, 3 angle valve job, valve seals, the gaskets I need (already have head gaskets and valve cover gaskets), bearings, oil pump and rings for around $500-550 or I can pay that dude $1049 for a short block w/ forged pistons + 114 shipping, I'm looking at nearly $1200.

If you need a whole new short block, it's probably a good deal (his feedback is good - I went through 4 pages and he has many people who replied w/ positive feedback).
 
Once you run into a problem, you will find out why its better sometimes to go local instead of having to ship a shortblock on a pallet all the way across the country on your time
 
What do you mean. I wanted to rebuild but the cost for that would be about how much this was gonna cost me. i can get this block for about 800.00 shipped. And take my time( i need something to build for a quick swap cause i cant be without my car for too long) As far as problems im not plannning on runnning into any. But if i do then i will have to repair or take care of it locally.
but wouldnt it make more horses than 225+ with stock heads? I do plan on different heads cause i want at least 275ponies out of this thing.
 
Makdaddymac said:
What do you mean. I wanted to rebuild but the cost for that would be about how much this was gonna cost me. i can get this block for about 800.00 shipped. And take my time( i need something to build for a quick swap cause i cant be without my car for too long) As far as problems im not plannning on runnning into any. But if i do then i will have to repair or take care of it locally.
but wouldnt it make more horses than 225+ with stock heads? I do plan on different heads cause i want at least 275ponies out of this thing.
what if it slipped through their quality control and you get junk, think it doesnt happen? At the prices listed they are selling a ton of them, mistakes in machining will happen, no doubt about it. What happens when you have to send it back, toss it in a truck on a pallet, drive it to a shipping terminal etc. Good luck
 
If you are looking for something on the cheap, it's not a bad idea. I have a local machine shop that quoted me a total of 800 for my rebuild if / when I need it.

There is nothing wrong with going ebay for the right price.

Another option that you should consider is a J/Y explorer V8. wwwmidwestmustangsnet was trying to sell one on ebay (minus intake but with heads) for $400.00 out of kentucky.

As far getting any HP out of a stock rebuild, there is non there to unlock. All of the power potential lies in the heads / cam and induction. [leaving out stroked displacments]