HOW DO I BLOCK THIS OFF, GOOD IDEA?

DNA DOA · Feb 27, 2007

I got tired of waiting for the car lift to show up so I pulled the motor and trans on Sunday. I have decided to not use the "heater tube assembly" which connects to the front of the upper intake manifold and goes back to the firewall and attaches to the little small bendy black hoses that go to heater core.

I don't care if my summer daily driver/race car has heat or not. So how do I block off the hole in the upper intake and the one tube that comes out of the water pump that connected to the heater tube assembly?

Is this a good idea or am I making a big mistake? I have pics I will try to put up. I went to NAPA and got a brass plug for the top hole in the upper intake, I think this will work. Has anyone else come across this little mod?

Thanks,
Ben

View attachment 400671

Mustang78 · Feb 27, 2007

you could run a short piece of heater hose connecting the two..

~Mark~

DNA DOA · Feb 27, 2007

I have been looking through the 200 mustang mags that I have and there is a small picture of a piece of hose and a clamp on the waterpump outlet, sort of like a nipple. Can I say that?

"Mongoose" · Feb 27, 2007

It's ether a 5/8" or 3/4" rubber cap, that you slip over the fitting and use a hose clamp to seal it off.

WaterPog · Feb 27, 2007

you'd be better off removing the steel tube that the hose attaches to and taping the hole left behind for a pipe plug, but the cap will work.

AllFordPerf · Feb 27, 2007

The cap you seek is available at most parts stores in the " help " section. Help is the brand name. The package is red. If I was at the shop I could give you a part #. If you really want to be baller get the Edelbrock high flow pump. The holes are tapped so you can put a pipe plug in to block them off.

DNA DOA · Feb 28, 2007

Yeah if you think of it next time your at the shop drop me a line with the part number. Thanks.

SMOKEDYA · Mar 1, 2007

Hey woooooo wait a minute there pal, wont that add more H.P? No fair man! peace

john

time only · Mar 1, 2007

AllFordPerf said:
The cap you seek is available at most parts stores in the " help " section. Help is the brand name. The package is red. If I was at the shop I could give you a part #. If you really want to be baller get the Edelbrock high flow pump. The holes are tapped so you can put a pipe plug in to block them off.

Those cap could also be found in the A/C ,Radiator asles,I believe they are call " Heater hose cap " or something along that line.

DNA DOA · Mar 1, 2007

Tricks of the trade my friend, tricks of the trade! You have to come over and look at all the stuff I just bought for the Notch. I'm over my head and lovin' it.

TheRedBlur · Mar 2, 2007

you could use the sensor in the tube to plug up the hole, but it'd be better to run the hose into the manifold.

HOW DO I BLOCK THIS OFF, GOOD IDEA?

DNA DOA

Member

Mustang78

New Member

DNA DOA

Member

"Mongoose"

New Member

WaterPog

AllFordPerf

New Member

DNA DOA

Member

SMOKEDYA

time only

New Member

DNA DOA

Member

TheRedBlur

Active Member

Similar threads

HOW DO I BLOCK THIS OFF, GOOD IDEA?

Member

New Member

Member

New Member

New Member

Member

New Member

Member

Active Member

Similar threads

Privacy & Transparency

Privacy & Transparency