• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

How Hard to get a Carbed Stang through emmissions

  • Thread starter Thread starter UpRise_5.0
  • Start date Start date Jul 4, 2004
U

UpRise_5.0

Founding Member
Jun 16, 2002
664
1
16
Canada
Jul 4, 2004
#1
  • Jul 4, 2004
  • #1
How hard would it be to get a 1989 5.0 through emmissions with a Carb?

Its in Canada so theres no visual check except for cats, and they do an idle and WOT test.
 

stangbear427

Active Member
Nov 11, 2002
2,401
1
49
New England
Jul 4, 2004
#2
  • Jul 4, 2004
  • #2
Easy as cats, a tune up, and some chemical.
 

cevtv

Founding Member
Sep 15, 2002
1,113
0
37
Massachusetts
Jul 4, 2004
#3
  • Jul 4, 2004
  • #3
In the US it is technically illegal to remove the EFI - it is considered to be part of the emissions system. Not saying you can't do it and get away with it, though........
 

stangbear427

Active Member
Nov 11, 2002
2,401
1
49
New England
Jul 4, 2004
#4
  • Jul 4, 2004
  • #4
Really? I didn't know that. Learn something everyday, right? Huh. You sure that isn't only in Taxachusetts? Your state is so screwed up they would have something like that. (nothing against you of course! I'm just an unhappy neighbor- I figured with how you worded your location you could take it) Anyway, I was under the impression that you just had to supply paperwork with carb numbers for everything you changed. We never had any problems doing it that way at the shop.
 

cevtv

Founding Member
Sep 15, 2002
1,113
0
37
Massachusetts
Jul 4, 2004
#5
  • Jul 4, 2004
  • #5
As far as I remember, it's an EPA thing - which would make it Federal.

I think that most emissions testers don't even realize what alot of the inspection laws are. I had one guy fail one of my trucks because the aftermarket driving lights didn't work - he swore that the law said that all lights must be in working order...............it actually says that all FACTORY original lights must work........

Yeah, this state sucks. If I could afford to leave, I would be gone in a matter of seconds!
 

stangbear427

Active Member
Nov 11, 2002
2,401
1
49
New England
Jul 4, 2004
#6
  • Jul 4, 2004
  • #6
Yeah, but at least you're allowed to defend yourself there. Oh no, wait, you can't do that either... sorry
 

cevtv

Founding Member
Sep 15, 2002
1,113
0
37
Massachusetts
Jul 4, 2004
#7
  • Jul 4, 2004
  • #7
Well, they did change the law about shooting someone who breaks into your house........you DON'T have to be trapped in a corner anymore............
 
U

UpRise_5.0

Founding Member
Jun 16, 2002
664
1
16
Canada
Jul 4, 2004
#8
  • Jul 4, 2004
  • #8
Anyways so its not hard to get a carb through emmissions?
 

stangbear427

Active Member
Nov 11, 2002
2,401
1
49
New England
Jul 4, 2004
#9
  • Jul 4, 2004
  • #9
No. Not if it's being tuned by someone who knows what they're doing, and the car runs well and has the proper emissions equipment- most importantly, good catty converters. It doesn't usually hurt on the higher mile motors to chemically detox the engine if it hasn't been done, usually costs a couple hundred bucks but you wouldn't believe the crap you can blow out the tailpipes with the right stuff... made a huge difference on getting my 180,000 mile carbed '84 GT through.
 
U

UpRise_5.0

Founding Member
Jun 16, 2002
664
1
16
Canada
Jul 5, 2004
#10
  • Jul 5, 2004
  • #10
OK yeah cats are all good but smog pump isnt hooked up would that cause a bigg difference?
 

89MustangGX

I have nothing productive to add!
Jul 3, 2001
10,262
1
0
Mill Creek, WA
Jul 5, 2004
#11
  • Jul 5, 2004
  • #11
I took my orange car through without any problems. It was a healthy running motor, had some real nice goodies on it, and the only peice of emissions was the cats, nothing else was there.

All I did was tune the idle air-fuel mixture way lean, to the point it was stumbling and would die, etc. It was enough to let it go through emissions at idle and on the dyno. Just turned it back when I was done.
 
U

UpRise_5.0

Founding Member
Jun 16, 2002
664
1
16
Canada
Jul 5, 2004
#12
  • Jul 5, 2004
  • #12
Thanks looks like i could pass emmissions then with a carb! looks like im doing the swap!
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Jul 6, 2004
#13
  • Jul 6, 2004
  • #13
I'll put my two cents in...

The carb to EFI swap means that you'll need to replace the ignition with a duraspark. There is no working MAF or TPS to tell the computer how much spark advance to run.

Once the computer is removed there is no way to control the smog pump. The two vacuum valves controlled by the computer have no source for their signals. Other people will tell you that a smog pump isn't needed for catalytic converters, but I won't. The excess air reacts with the catalyst to burn up the hydrocarbons. The cats will eventually clog and fail, restricting the exhaust flow.

Carbs are cheaper than fuel injection & if Ford could have met the air quality & polution limits using a carb they would have done it.

Here's a book that will get you started with how the Ford electronic engine control or "computer" works, with some excellent information on how it controls emissions.

Ford Fuel Injection & Electronic Engine Control 1988-1993 by James Probst :ISBN 0-8376-0301-3.

It's about $20 from Borders.com see http://www.amazon.com/ . Select boo...ns is digging a deep & expensive hole. :bang:
 
B

Boss 351

Here sthhhhhhhheeeve take a picthh of my man flowe
Jul 13, 2003
2,433
23
48
Canada
Jul 6, 2004
#14
  • Jul 6, 2004
  • #14
Or move to Quebec where this no emmisions testing
 

stangbear427

Active Member
Nov 11, 2002
2,401
1
49
New England
Jul 6, 2004
#15
  • Jul 6, 2004
  • #15
Did I mention mine went through with flying colors? Granted, it wasn't a carb conversion, but it always passed with single digit readings where I was allowed double and triple digits. It ran cleaner than my EFI that is seven years newer and runs at least as well. I'll agree on one big huge point though- it may be cheaper to build HP with a carb, but driving with one every day and having it legal can be way more expensive than it's worth. I wish I hadn't sold that car, but I don't miss the carb one bit.
 

5.0 HOtrain

Founding Member
May 20, 2001
2,247
0
47
New Hampshire
Jul 6, 2004
#16
  • Jul 6, 2004
  • #16
Are you saying it would be expensive to pass my 418 with NO cats or smog and a 1000cfm carb Good thing we have no emmisions (yet, crosses fingers) but I would be focked on a visual Oh well, time to find a 79 stang and do a vin swap
 

stangbear427

Active Member
Nov 11, 2002
2,401
1
49
New England
Jul 6, 2004
#17
  • Jul 6, 2004
  • #17
Yeah, ours in CT is out of commission now too. (for the time being) Hopefully it stays gone for awhile
I think it's 20 years to exeption here anyway, so my '84 would be outa the running now if I'd kept it...
 

89MustangGX

I have nothing productive to add!
Jul 3, 2001
10,262
1
0
Mill Creek, WA
Jul 6, 2004
#18
  • Jul 6, 2004
  • #18
stangbear427 said:
Yeah, ours in CT is out of commission now too. (for the time being) Hopefully it stays gone for awhile
I think it's 20 years to exeption here anyway, so my '84 would be outa the running now if I'd kept it...
Click to expand...

That's where I took my orange car through -- in CT.
 

88stangmangt

Active Member
Nov 25, 2003
2,332
1
48
Stafford,VA
Jul 6, 2004
#19
  • Jul 6, 2004
  • #19
you will fail because they do a visual and they wont even run it on the dyno.
 

maverick0716

Founding Member
Jan 12, 2002
3,924
0
56
Chilliwack, BC, Canada
Jul 6, 2004
#20
  • Jul 6, 2004
  • #20
They do a WOT test where you live?!! That's nuts!!
 
You must log in or register to reply here.

Similar threads

D
Engine 85 GT Backfires through Carb
  • DienstXIV
  • Oct 3, 2025
  • Fox 5.0 Mustang Tech
Replies
19
Views
703
Fox 5.0 Mustang Tech Oct 7, 2025
85GTStangGuy
M
Running rough
  • Mike3
  • Dec 31, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
399
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 1, 2026
Mike3
M
C
Engine Idle cuts out
  • claypoolxx
  • Mar 7, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
25
Views
766
Fox 5.0 Mustang Tech Friday at 5:04 PM
alutwon
Engine 1990 LX 5.0L EFI Mustang Fuel Management Problems - HELP!
  • 5.0LXStanger
  • May 25, 2025
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
45
Views
2K
Fox 5.0 Mustang Tech Jul 11, 2025
5.0LXStanger
Paint and Body How should I treat this hard to reach rust
  • AnthonyA1234
  • Feb 23, 2025
  • Fox 5.0 Mustang Tech
Replies
12
Views
584
Fox 5.0 Mustang Tech Feb 25, 2025
Rcdgl
R
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?