my UPR adjuster needs an upgrade. the set screw came out and now i have no way to adjust my clutch pedal height engagement. fortunately, during all my clutch woes, i bought a Pro 5.0 adjuster, so i have that one at home. how hard is the install? any instructions floating around?
It's a common sense install. Remove the cable from the pedal, remove the old adjuster, install the new one, and connect the cable. From there set the adjuster and your'e done.
It's a common sense install. Remove the cable from the pedal, remove the old adjuster, install the new one, and connect the cable. From there set the adjuster and your'e done.
The pedal has a slot, and the cable has a barrel type end that slips in and out of the slot. Just pull the pedal up a little and roll the cable end around to feed it out of the pedal. If you look at it under the dash, it'll make more sense.
its easy, just jump right into it, its pretty self-explanitory. Also if you want you can go to steeda or maximum motorsports web sites and download there manuals. I would do that to get an understand of what you are doing and see some pictures.