• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

How much is the stock intake holding me back?

  • Thread starter Thread starter Racerjoey1
  • Start date Start date Sep 23, 2005
R

Racerjoey1

Founding Member
Oct 21, 2002
76
0
7
Birmingham, AL
Sep 23, 2005
#1
  • Sep 23, 2005
  • #1
The title pretty much covers it, all the mods are in my sig. Will it be more of a gain than with a stock engine?

Thanks,
Joey
 

stang302v8

New Member
Aug 16, 2005
94
0
0
carlisle, pa
Sep 23, 2005
#2
  • Sep 23, 2005
  • #2
well i know when i changed the intake on my 5.0 and put an edelbrochy performer rpm intake on it it made a hella difference. I was reaching Rpm's way quicker and able to squeeze 500 extra rpm's out of each gear than i could with the stock intake. by the way how do you like ur f303 cam? im deciding on getting one....does it have good low end - midrange power? hows the idle? I would go with the edelbrock rpm performer...it is pretty much the best for the $$ it costs. trick flow makes a nice intake too.
 

darthcual

Member
Mar 31, 2005
985
19
18
Arlington, TX
Sep 23, 2005
#3
  • Sep 23, 2005
  • #3
Since you've done heads and cam i'd say quite a bit. Stock intake is extremely restrictive on the #1 cylinder.
 

stang302v8

New Member
Aug 16, 2005
94
0
0
carlisle, pa
Sep 23, 2005
#4
  • Sep 23, 2005
  • #4
yeah the intake really makes a difference on how the heads flow. if ur running aftermarket heads with stock intake ur losing quite a bit air flow through those bigger ports on the heads.
 
R

Racerjoey1

Founding Member
Oct 21, 2002
76
0
7
Birmingham, AL
Sep 23, 2005
#5
  • Sep 23, 2005
  • #5
On the F303- I like it, it makes the car sound like its got something in it. People stare when you pull in a gas station (although that might be because my car looks like a beater, lol). It has about the same power on the bottom as the stock engine but it starts pulling harder around 2500 or so. I guess I really need an intake to take full advantage of my combo.

I was just thinking again though, for the cost of a fuel injection intake, I could probably put a holley 600 on the car and have the easy tuning and cleaner engine bay. I dont know what to do. Its only a matter of time before they start doing emissions testing everywhere.
 

stang302v8

New Member
Aug 16, 2005
94
0
0
carlisle, pa
Sep 23, 2005
#6
  • Sep 23, 2005
  • #6
def go carburetor. u can work on them easy and get more power. im running a 600 holley on mine and its great. u have easy time taking turbo imports with that f303?
 
V

v8only

Active Member
Jul 3, 2003
2,378
22
49
Sep 23, 2005
#7
  • Sep 23, 2005
  • #7
What kind of times are you running on that explorer engine combo? Hp? I'm just finishing mine.

I'm assuming you're running the stock explorer intake. If you are, with your combo, it should suit it just fine, as it flows nearly identical to the gt40 intake. If you're running a stock HO mustang intake, then, well, it's time to upgrade!!
 

shttygtstang

New Member
Jun 2, 2004
978
0
0
Sep 23, 2005
#8
  • Sep 23, 2005
  • #8
you dont need injectors and wont ne time soon . I would buy a adjustable fuel regulator. See sig i never upgraded my injectors to the 36s i had because i was still running rich.
a carb is better tunning and will give ya some more hp in a na combo but it will cost the same as buying new injectors i think good luck
 

Car RamRod

Banned
Mar 30, 2005
623
0
0
Queens, NYC
Sep 23, 2005
#9
  • Sep 23, 2005
  • #9
Racerjoey1 said:
The title pretty much covers it, all the mods are in my sig. Will it be more of a gain than with a stock engine?

Thanks,
Joey
Click to expand...
your setup is like mine but cammed......you definelty need an intake. Do you have the explorer lower intake that came with that shortblock and heads?
 
R

Racerjoey1

Founding Member
Oct 21, 2002
76
0
7
Birmingham, AL
Sep 23, 2005
#10
  • Sep 23, 2005
  • #10
Sorry it took so long to respond. I guess I need to explain what I have better. I am using the Explorer block, crank, and rods. I have the speed pro pistons but other than that it is a stock short block. The heads are GT40P obviously but I am using the stock Mustang HO intake manifold. The car feels pretty strong, but I think it has more in it.

Maybe you guys can help me decide if the car is making decent power. I am assuming I have stock gears, it runs about 2100rpm or so at 70mph in 5th. I have crappy tires on it that came with the car so I dont know how good this info is. 1st gear is absolutley useless. I can let the clutch out and be idling along and stab it and it will shoot up the to redline very quickly. I can spin the tires at will at any rpm in 1st gear. I can't spin them at all in 2nd gear unless I am already spinning in 1st and then hit 2nd but even then it will spin for a second and then grab and start going.

To answer another question I have not taken the car to the track yet. I don't have insurance on it because I want to get some more stuff done on it before I drive it. It needs rear shocks terribly, I need to get my x-pipe on, I need mufflers because I don't have any on it right now. I need wheels and tires (youd know why if you saw the rims the ******* before me put on the car).

Ill quit rambling on, sorry for the long post.

Later,
Joey
 
V

v8only

Active Member
Jul 3, 2003
2,378
22
49
Sep 23, 2005
#11
  • Sep 23, 2005
  • #11
Yes you need an intake, and yes it will help tons.

No insult intented, but you need to either get a job for this car, or be able to divert money to it. Before you get an intake, you need the basics addressed, and that means car insurance (if you drive it on the road even ONCE) and shocks/struts) If you're on a tight budget, follow tmoss's guide and port your own lower.
 

notchback

Founding Member
May 30, 2000
1,950
0
36
St Clair Shores MI
Sep 24, 2005
#12
  • Sep 24, 2005
  • #12
it'll keep you from the 11's , thats about it.
 
V

v8only

Active Member
Jul 3, 2003
2,378
22
49
Sep 24, 2005
#13
  • Sep 24, 2005
  • #13
notchback said:
it'll keep you from the 11's , thats about it.
Click to expand...

lol, it's more likely keeping him from the 13's
 
R

Racerjoey1

Founding Member
Oct 21, 2002
76
0
7
Birmingham, AL
Sep 24, 2005
#14
  • Sep 24, 2005
  • #14
I work full time and go to school so a 2nd job isnt really possible. The car gets driven mainly through the neighborhood to keep the battery charged. I have a truck to drive every day. Im not ordering the intake right away. I just wanted to know how much it would help me.

I think the order I will do things is this-

Quiet the thing down, shocks, wheels and tires, insurance, paint

The way I see it there is no point in getting insurance and wasting money while the car sits in the garage. Then that takes away money for mods.
 
You must log in or register to reply here.

Similar threads

9
Engine Donor '00 Mountaineer meet '91 Fox
  • 91firecracker
  • May 11, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
41
Views
917
Fox 5.0 Mustang Tech May 28, 2026
91firecracker
9
H
Forced Induction On3 Turbo Kit- Parts list NEEDED - 302 Stock Motor
  • Hirothecool1
  • Feb 27, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
21
Views
1K
Fox 5.0 Mustang Tech Mar 7, 2026
slow84lx
S
Engine 87 NA - Tune or no Tune needed?
  • R82148V
  • Sep 17, 2025
  • Fox 5.0 Mustang Tech
Replies
8
Views
376
Fox 5.0 Mustang Tech Sep 17, 2025
R82148V
SOLD Sold.
  • TTSaleen
  • Jul 1, 2026
  • Engine and Power Adder
Replies
6
Views
293
Engine and Power Adder Jul 2, 2026
Noobz347
S
Engine How does oil make its way into the front sump?
  • Sock_Monke
  • May 10, 2025
  • Fox 5.0 Mustang Tech
Replies
16
Views
882
Fox 5.0 Mustang Tech May 22, 2025
Chuckster101
C
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?