• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

how much nitrous?

  • Thread starter Thread starter 84fiveohore
  • Start date Start date Jun 13, 2007
8

84fiveohore

New Member
Apr 23, 2007
23
0
0
york, pa
Jun 13, 2007
#1
  • Jun 13, 2007
  • #1
how big of a shot can i put through my 79 351w, on a weekend race basis.. i dont wanna blow her up. its a .030 bore with stock oversized pistons(.030) offenhauser 360 intake, crane fireball 2 cam, heavy ported d00e heads, t-5, king cobra clutch, 3.45's coming off posi. brandy new stock bottom end..
theres alot of guys talkin crap at the track i need a little edge...
thanks guys
 

ninety15.0

New Member
Mar 10, 2004
1,336
0
0
Jun 13, 2007
#2
  • Jun 13, 2007
  • #2
i would say at least a 175 shot....maybe 200. Obviously a wet kit.
 
8

84fiveohore

New Member
Apr 23, 2007
23
0
0
york, pa
Jun 13, 2007
#3
  • Jun 13, 2007
  • #3
i read that the wet kit is better for your motor than the dry kit... and what is the big difference between the carb plates.. some have the bar through the middle adn some spray out of the sides.? whats the best ... as well as how much shot can i put through on a consistant basis without hurting my motor
 

86nu

New Member
Jan 6, 2007
94
1
0
Birmingham, Al
Jun 13, 2007
#4
  • Jun 13, 2007
  • #4
bars, or permimiter spray dont have too much differences, the bars through the middle have been around the longest. On a stock style piston, anything over 200 is prob gonna be living on borrowed time
 

Modular2v

Founding Member
Jun 30, 2002
3,222
23
99
oklahoma
Jun 13, 2007
#5
  • Jun 13, 2007
  • #5
since it is a 351 block it has alot stouter mains than a 302...i wouldnt hesitate hittin it with a 200 shot!
 

86nu

New Member
Jan 6, 2007
94
1
0
Birmingham, Al
Jun 13, 2007
#6
  • Jun 13, 2007
  • #6
Modular2v said:
since it is a 351 block it has alot stouter mains than a 302...i wouldnt hesitate hittin it with a 200 shot!
Click to expand...


I wouldnt worry about the bottom end, its the stock style piston, if its not forged, cross the fingers
 

ChromdOutDubs

Member
Sep 1, 2005
268
1
18
Tavares, Florida
Jun 13, 2007
#7
  • Jun 13, 2007
  • #7
I was wondering the same thing for my motor... I have a 408w with 4340 forge internals and forge probe pistons. I guess from what yall are saying i should be able to spray a easy 200 wet shot onto my setup? But will the block hold up? Thanks for the info...

-AJ
 

86nu

New Member
Jan 6, 2007
94
1
0
Birmingham, Al
Jun 13, 2007
#8
  • Jun 13, 2007
  • #8
ChromdOutDubs said:
I was wondering the same thing for my motor... I have a 408w with 4340 forge internals and forge probe pistons. I guess from what yall are saying i should be able to spray a easy 200 wet shot onto my setup? But will the block hold up? Thanks for the info...

-AJ
Click to expand...

on my forged 351 i plan on shooting over 200 75 off the line and 175 shortly after that.

Id spray the 200 and not look back, make sure the air/fuel is good, forged doesnt mean it wont break, just means it will take a more mistakes
 
You must log in or register to reply here.

Similar threads

  • Locked
“Doing stuff the wrong way for the right reasons”: A related stupid story.
  • CarMichael Angelo
  • Apr 26, 2020
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
5K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 27, 2020
a91what
Nitrous question for a new guy....how much damage? Or should I just go NA?
  • InMyPrimeSVT
  • Feb 12, 2012
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 12, 2012
revhead347
How much NOS?
  • rclifton
  • Jan 5, 2011
  • Fox 5.0 Mustang Tech
Replies
3
Views
715
Fox 5.0 Mustang Tech Jan 6, 2011
srtthis
F
Nitrous questions
  • FoxTail
  • Jan 10, 2011
  • Fox 5.0 Mustang Tech
Replies
5
Views
1K
Fox 5.0 Mustang Tech Jan 10, 2011
ExTrooper
E
F
New Guy lots of Questions
  • FoxTail
  • Jan 2, 2011
  • Fox 5.0 Mustang Tech
Replies
4
Views
809
Fox 5.0 Mustang Tech Jan 2, 2011
2000xp8
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?