How should I go about doing this?

65fastback2+2 · Jun 11, 2007

Well....its time for the mach to be faster....which means I need FI and I need to figure out how to get there.

Currently Im thinking dump some terminator pistons/rods into my mach block so the bottom end if forged then....then Im thinking supercharger or turbo....I can get some good deals on paxton or vortec's...but I dunno if they will make me enough power....id like to make 550 wheel but be able to turn the boost up to about 700 wheel hp. So, Im thinking turbo will be good for this...ive looked at the hellion kits, which are nice, but $6k for single turbo seems alot.

any suggestions?

Bluffing024 · Jun 11, 2007

Get a 2.6L KB

Bluffing024 · Jun 11, 2007

MPH's HP twin 50mm kit is also a viable option.

2002 GT
Stock rating at 260 fwhp / 302 fwtq
HP Turbocharged = 720 rwhp / 651 rwtq

four six · Jun 11, 2007

97stang_guy said:
Get a 2.6L KB

But he'll lose his shaker

smokin00GT · Jun 11, 2007

Get a paxton, I'm at 576 with just 13# of boost on a 2V. The novi 2000 can spool over 20#. Turbos are aslo very cool, but just like you said they are pricey!

65fastback2+2 · Jun 12, 2007

four six said:
But he'll lose his shaker

thats more of a worry than power for me! its the whole reason i have the car

BennyBlown2v · Jun 12, 2007

Paxton or Vortech will meet your power wants/needs. A novi 2k or a T-trim vortech should suffice. Call modular powerhouse and ask about what they can do for you in the form of a Mongoose kit w/ a T-trim or Novi.

65fastback2+2 · Jun 12, 2007

smokin00GT said:
Get a paxton, I'm at 576 with just 13# of boost on a 2V. The novi 2000 can spool over 20#. Turbos are aslo very cool, but just like you said they are pricey!

if i look at kits....most say 8-10 psi....can you just turn those up?

K'Dash · Jun 12, 2007

Novi 2000 or Vortech T-trim is the cheapest way to go. A Kenne Bell might run you more money than you are willing to pay.

BennyBlown2v · Jun 12, 2007

65fastback2+2 said:
if i look at kits....most say 8-10 psi....can you just turn those up?

Yes, all you need is a pulley and a belt. Pulleys range from around $75 (Vortech/Paxton brand) to $150+ (Reichard Racing lightweight with the grip grooves and junk). Belts are, I dunno, like 13-20 bucks.

superstang01 · Jun 12, 2007

smokin00GT said:
Get a paxton, I'm at 576 with just 13# of boost on a 2V. The novi 2000 can spool over 20#. Turbos are aslo very cool, but just like you said they are pricey!

Im with you on the paxton....there is a mach here in town with a novi 2000(i think thats what it is)....its make 580 rwhp on 15psi and a full exhaust ,and all the little bolt ons........il just say it goes like a ****er

65fastback2+2 · Jun 13, 2007

superstang01 said:
Im with you on the paxton....there is a mach here in town with a novi 2000(i think thats what it is)....its make 580 rwhp on 15psi and a full exhaust ,and all the little bolt ons........il just say it goes like a ****er

wonder how much it makes on 20psi then? 580 is great for a street tune, but i wanna run 700 at the track

smokin00GT · Jun 13, 2007

Do you have a built bottom end? If it's still a stocker it will break at those HP levels. Also heads can only flow so much...intake is only so big....these also are expensive issues. 700 HP is pretty hard to obtain with out a good base.

65fastback2+2 · Jun 13, 2007

smokin00GT said:
Do you have a built bottom end? If it's still a stocker it will break at those HP levels. Also heads can only flow so much...intake is only so big....these also are expensive issues. 700 HP is pretty hard to obtain with out a good base.

it'll be a forged bottom end...so thats fine....heads and intake are almost exactly the same as terminators...so since they can make tons on stock heads/intake, i should be fine there as well.

joshjwc9 · Jun 13, 2007

You should be in that range once you get it tuned for 101 octane maybe..get a handheld tuner and keep 3 tunes on it, your stock tune NA, 93 octane for DDing and a 101 track tune.

Paxton and Vortech also have kits that allow use of your shaker's functionality as well I believe.

Gearbanger 101 · Jun 13, 2007

There's a guy around here with an '03 Mach 1 with the Vortech kit on it. He's only running an S-Trim, but the car is still insane fast. He dyno's around 500rwhp with it.

04GTMustang · Jun 14, 2007

well me personally i would like to get a twin turbo kit just because i am getting tired of hearing ricer blow off valves in my ears when they drive by. so i would like to get a twin turbo just the the simple reason then i can let them hear my blow off valve in there ear and maybe blow over there car

other than that i think supercharger wine is straight up nasty

the novi 2k will get u plenty of power but 700 is going to be pretty tough to get to even with a TT. if u get a novi kit you will save a good bit of money and throw that money into some ported heads and a good set of blower cams and you will get to ur goal and you will still probably save money from buying a TT.

65fastback2+2 · Jun 14, 2007

04GTMustang said:
well me personally i would like to get a twin turbo kit just because i am getting tired of hearing ricer blow off valves in my ears when they drive by. so i would like to get a twin turbo just the the simple reason then i can let them hear my blow off valve in there ear and maybe blow over there car

other than that i think supercharger wine is straight up nasty

the novi 2k will get u plenty of power but 700 is going to be pretty tough to get to even with a TT. if u get a novi kit you will save a good bit of money and throw that money into some ported heads and a good set of blower cams and you will get to ur goal and you will still probably save money from buying a TT.

hahah, ya, id love to do turbo just to be different, but $6k for just a tt setup, not including drivetrain and such....ouch

I dont think 700 hp should be too tough, with boltons and a 2.4kb, my buddy made 650 rwhp on 93 octane hehe. mind you, terminator motor and mine are almost identical. i know a kb prolly flows better or w/e, but im still thinking 700 is doable

mustang gt 2003 · Jun 14, 2007

Ok this must sound like a dumb question.... but do you hear the supercharger wine on all chargers? I mean is the sound distinct like it would be on a kenne bell for instance?

Gearbanger 101 · Jun 14, 2007

Positive Displacement (Kenne Bell, Eaton, Whipple) = Whine
Centrifugal (Paxton, Vortech, ATI) = Whistle

How should I go about doing this?

New Member

Active Member

Active Member

Member

New Member

New Member

New Member

New Member

New Member

New Member

Active Member

New Member

New Member

New Member

Active Member

Straight Outta Locash

New Member

New Member

Member

Straight Outta Locash

Similar threads

Privacy & Transparency

Privacy & Transparency