• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 V6 Mustang Tech

Engine How to check cooling system if it contains air in it

  • Thread starter Thread starter Gabriel72RLP
  • Start date Start date Jun 7, 2019
G

Gabriel72RLP

Member
Dec 17, 2018
13
3
13
Germany
Jun 7, 2019
#1
  • Jun 7, 2019
  • #1
Hello,

I own a MY 1997 Modell of 1998 V6. How can i check the cooling system if air pokets are in it? I am just asking, because i have a bad feeling. You know this feeling if its something wrong, even no bad signs are shown. The radiator, thermostat and the cooling fluids were replaced a couple of weeks ago. The parts were changed from an expierienced Mechanic. He owns a couple US Cars like a old Cadillac Lincoln Town Car MY 1980 and a Ford Pick-Up Modell F-150 Year i don´t know. I have this bad feeling, that he might didn´t do the exact coolant filling proccedere for a Mustang 1998 V6. Evertything seems to be ok. The Temperature ist exactly in the middle of the gauge. It don´t overheat. Motor runs smooth. Idle is good. But my ass in the seat is feeling, that there is something wrong with the cooling system. How can i check the cooling system?
Thanks for your help.
 

wmburns

SN Certified Technician
Aug 14, 2009
5,892
514
204
Houston Texas
Jun 7, 2019
#2
  • Jun 7, 2019
  • #2
Here's some information that may help.

V6 coolant refilling procedure:

1998 mustang irregular rpm's showing hot

98 mustang was overheating, jerking, running rough and just not sounding healthty. New wires, plugs,thermostat, Air Filter you name it has been replaced along with a radiator, hoses and battery within the past two months. Once the tune up was completed it jerked a little then ran fine for 10...
www.allfordmustangs.com

The short answer to your question is to open the coolant bleed screw when the motor is STONE cold. IF there's coolant right at the bleed screw then the system is full.

Want to check some more? Do you have an ODB2 scanner? Do you have infrared scanning thermometer? Use the infrared thermometer to measure the temperature of the T-stat housing. Compare this reading to the ECT sensor as reported by the PCM.

ForScan ODB2 scanner w ELM327 USB

ForScan ODB2 scanner w ELM327 USB

While working on your car have you ever wanted: to find an ODB2 operational PID value (say fuel pressure or MAF)? How about graph a PID value over time? Or compare multiple PID's over time? Access a bi-directional PCM control such as test a...
www.stangnet.com
 
B

Bsharp21

Member
Jun 12, 2019
8
1
13
michigan
Jun 14, 2019
#3
  • Jun 14, 2019
  • #3
Do what he said and crack that bleeder screw and make sure theirs coolant right there. what he was supposed to do is use a coolant fill kit and hook it to an air line to create a vacuum in the system in order to fill it and have no air. another way to check is to turn your heat on full blast and make sure its actually hot, if you have air in the system it will lack heat. one way ive found that can get rid of little air pockets is to rev the engine up to about 2000 rpms and hold it their for about 30 seconds, do that a few times and it will help get some of that air out.
 
You must log in or register to reply here.

Similar threads

J
PCV system help for S/C
  • jay99914
  • Feb 16, 2025
  • SN95 4.6L Mustang Tech
Replies
7
Views
653
SN95 4.6L Mustang Tech Feb 24, 2025
jay99914
J
SURGING IDLE / NO IDLE CHECKLIST FOR 1999–2004 MUSTANG GT (4.6L 2V) - Work In Progress
  • Noobz347
  • Aug 30, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
912
1996 - 2004 SN95 Mustang -General/Talk- Aug 30, 2025
Noobz347
SURGING IDLE / NO IDLE CHECKLIST FOR 1996–1998 MUSTANG GT (4.6L 2V) - Work In Progress
  • Noobz347
  • Aug 30, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
742
1996 - 2004 SN95 Mustang -General/Talk- Aug 30, 2025
Noobz347
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
3K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
M
Progress Thread mnky99 2001 V6 evap core, ac compressor, heater core replacement
  • mnky99
  • Sep 5, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
516
1996 - 2004 SN95 Mustang -General/Talk- Sep 5, 2025
mnky99
M
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 V6 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?