im having a hard time finding some good solid info on measuring and checking PTV, if some one could post up a link that would be great. Thanks
How to check PTV
- Thread starter Cobra123089
- Start date
Are you talking about before hand or after work performed? Before any head work you will just have to line up all the marks and make sure the chains are set properly. That is acheived by making all of you observations and marks before removing anything.
Some info can be found here.
http://forums.stangnet.com/7035066-post4.html
After a cam install or the like you can turn the engine by hand by using a socket and breaker bar with a cheater pipe. Remove the spark plugs and turn the crank. Any resistance and you have issues.
Some info can be found here.
http://forums.stangnet.com/7035066-post4.html
After a cam install or the like you can turn the engine by hand by using a socket and breaker bar with a cheater pipe. Remove the spark plugs and turn the crank. Any resistance and you have issues.
Similar threads
