How to remove column?

tillmanspeed

New Member
Jun 4, 2006
24
0
0
I am trying to fix my bezel around my gauges and all. There is a screw on one side which I have off. I need to get the 4 way flasher off to get the rest of it to come off. Does anyone know how that thing attatches?

Any help is appreciated.

Chris
 
There is a bolt on one side of the "collar" so I can pull the whole assembly half way off. On the other side the 4 way flasher button is holding the rest of the bezel on. It is a button all by itself for the 4 way flashers. If i can figure out how to get that off, the rest of the collar will come off. Any ideas?

THANKS
 
I am perplexed. I had no idea Ford changed so much from the 89 to the 90.

On my 89, the 4-way flasher (emergency flasher) is a switch on the right side of my gauge pod right above the switch for my convertible top. Did they move this to the steering wheel column in 90?

The only "button" I have on the column is the white one at the bottom that allows my ignition switch to come back to the "LOCK" position so that I may take out my keys.

The "collar" is a round piece that goes around the back of the steering wheel (I have tilt). It just snaps apart on one side and comes right off.

The two upper/lower trim pieces that hide the column are held on by three screws. The white "button" goes through this.

There is one more lower trim piece that attaches to the bottom of the gauge pod that is held on by two screws.

Good luck.