How to remove the dash?

I know that there are like 4 or 5 main bolts. But in addition to that what all do I need to disconnect or remove, like wiring, heat/AC controls/ductwork, etc?

I am taking it completely out and it is just me, myself, and I, and I don't want to get it loose and find something is still connected. If it is possible to set the dash on the floor and disconnect it that would be ok though.

I already have the steering column, seats, console, and dashpad out of the car. The wiring harness connector to the firewall is already unbolted and pushed in to the interior.

As always I am trying not to damage anything in the process.

Thanks much,
Russ

Thanks.

I only broke one thing that i have found so far at least. Somehow I popped the light that lights up the "LIGHTS" light on the lower corner, and broke the plastic around it. The circuit panel is ok though.

I also broke one of the dash pad mounting tabs off, but I must have done that when I took the pad off, since the piece is still attached to the dash pad. Is one of the ones above the instrument panel. Guess I missed that screw. :-(
Shouldn't be an issue, but I was hoping to get away without any damage.

Russ