• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

How to set timing?

  • Thread starter Thread starter TrickFlowd
  • Start date Start date Oct 9, 2007

TrickFlowd

Member
May 17, 2003
240
0
16
Sayre, PA
Oct 9, 2007
#1
  • Oct 9, 2007
  • #1
Can anyone explain the exact way to set timing? What should it be at or better yet, what should I start at with the mods in my sig?
 

cenok is family

15 Year Member
Jun 25, 2003
1,409
69
79
Norman, Ok
Oct 9, 2007
#2
  • Oct 9, 2007
  • #2
before you start, get a soap pen or something you can mark "0" and what ever degree you want to set your car to on the harmonic balancer. makes it easier to see when adjusting the distributor. loosen the distributor bolt enough so you can twist the distributor. don't take the bolt out all the way though. there is a spout connector you must pull, hanging on the harness right by the distributor. if you don't pull it, the ecu will re-compensate for the timing adjust. when you're ready, hook up the timing gun and start your car. aim the gun at the balancer, you will see the markings. turn the distributor until the pointer is pointing at the mark you made, then retighten the distributor bolt. put the spout connector back in and check the timing again to make sure it didn't move when you were tightening the bolt back. then your done! when you advance your timing, your idle is going to raise a bit, just adjust it back down. also, make sure your TPS is set to .98 - .99v. generally, our cars like the timing between 13-16*.

the spout connector looks like this:



hope this helps.
 

Attachments

  • timing1.webp
    9 KB · Views: 118

87foxstang

Member
May 10, 2007
0
0
16
Cromwell, CT
Oct 9, 2007
#3
  • Oct 9, 2007
  • #3
thats wierd, unless i have been pulling something else the spout connector on my car looks totally different
 

TrickFlowd

Member
May 17, 2003
240
0
16
Sayre, PA
Oct 9, 2007
#4
  • Oct 9, 2007
  • #4
cenok is family said:
make sure your TPS is set to .98 - .99v. generally, our cars like the timing between 13-16*.
QUOTE]

how do I check the volts of the tps? obviously a volt meter...but unplugged or how? Thanks for the timing info!
Click to expand...
 

cenok is family

15 Year Member
Jun 25, 2003
1,409
69
79
Norman, Ok
Oct 9, 2007
#5
  • Oct 9, 2007
  • #5
87foxstang said:
thats wierd, unless i have been pulling something else the spout connector on my car looks totally different
Click to expand...

no you've been pulling the right one. the one in the picture is from an sn95 car. the only picture i could find on google image search. lol. i was just trying to give him an idea of what to look for.

INmemoryJBC8102 said:
how do I check the volts of the tps? obviously a volt meter...but unplugged or how? Thanks for the timing info!
Click to expand...

http://www.muscularmustangs.com/tps.php
 

87foxstang

Member
May 10, 2007
0
0
16
Cromwell, CT
Oct 9, 2007
#6
  • Oct 9, 2007
  • #6
ohhh i knew it looked different lol
 
You must log in or register to reply here.

Similar threads

P
Fuel New Eldebrock 1406 problems 1985 GT 5.0
  • Paddyman
  • Oct 22, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
179
Fox 5.0 Mustang Tech Nov 2, 2026
manicmechanic007
Paint and Body Door Latch Issue
  • KRUISR
  • Oct 9, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
276
Fox 5.0 Mustang Tech Oct 15, 2026
General karthief
Engine Standard or hi flow water pump?
  • AnthonyA1234
  • Sep 28, 2026
  • Fox 5.0 Mustang Tech
Replies
16
Views
432
Fox 5.0 Mustang Tech Oct 9, 2026
2000xp8
K
Drivetrain '87 5.0 Installing New Ring Gear and Pinion - Pattern Questions
  • karhoot
  • Apr 23, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
583
Fox 5.0 Mustang Tech May 9, 2026
Mindseye007
B
Engine Another no start after washing engine bay
  • bruno
  • Apr 26, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
24
Views
1K
Fox 5.0 Mustang Tech May 7, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?