Forged 347 stroker at 11:1
afr 185 cc heads with 5 angle valve job and port work
comp cam custom grind (.565 lift)
trick flow r-series upper and lower with 3/8 " phenolic spacer
24 lb injectors(getting to small)
prom m mass air (75mm)
msd electronics
underdrive pulleys
cold air intake
mac long tube headers to prochamber to 2 1/2 flowpaths
1.6 harland sharp rockers
BBK 70 mm throttle body
Let me know what you guys think it will be with a good tune. Going to pj's speedshop as soon as i get it all back together. Built by gor-den racing engines in west seneca N.Y.
-Jared
afr 185 cc heads with 5 angle valve job and port work
comp cam custom grind (.565 lift)
trick flow r-series upper and lower with 3/8 " phenolic spacer
24 lb injectors(getting to small)
prom m mass air (75mm)
msd electronics
underdrive pulleys
cold air intake
mac long tube headers to prochamber to 2 1/2 flowpaths
1.6 harland sharp rockers
BBK 70 mm throttle body
Let me know what you guys think it will be with a good tune. Going to pj's speedshop as soon as i get it all back together. Built by gor-den racing engines in west seneca N.Y.
-Jared