HP Performance TT kit

[WillDuhhBeast]

Has anyone ordered this kit directly from them? I shot them an email with some questions and such, but I havent heard of anyone ordering directly from them.


I think it's what I want to do, I have a great shop in town who can install and dyno it.

I hear great things about them, besides how long it takes to ship out. I figure that will give me time to save for the install and tune


So what do you guys think?


Anyone order from them?

 

[Kilgore Trout]

A link would be great...

 

[WillDuhhBeast]

http://www.turbochargedpower.com/


Forgive me, I thought this was common knowledge.


I believe its the same kit that MPH supplies to its customers.

 

[Kilgore Trout]

900 rwhp / 744 rwtq ('99 Cobra) - Race Fuel
786rwhp / 689rwtq @ 16psi ('04 Cobra)
740 rwhp / 700 rwtq ('03 Cobra) - Pump Gas
540 rwhp / 519 rwtq (stock '97 Cobra) - Pump Gas
488 rwhp / 570 rwtq (stock '03 Saleen GT) - Pump Gas
468 rwhp / 555 rwtq (stock '00 GT) - Pump Gas

 

[WillDuhhBeast]

I agree, it's one of the most prestigious (sp)? kits on the market. I'm obsessed with it.


I don't want to drive up to MPH to have them charge me MPH price to install and tune it, although I know they are the best at it according to many.


I'd rather have it shipped to me, and I'll take it to my local shop, guys which I trust quite a bit.


Of course I dont believe stage one can make thos HUGE numbers.. but i can handle its own I believe. I'm looking to eventually be at 500 or so HP when I build my block.. but for now I'm going to keep her tuned down, at least thats the plan.

So anyone have expericance with ordering direct from them? Gotta be someone out there.. this kit is amazing.

 

[02LaserRed2V]

I heard those things are a PITA to tune. Better make sure your tuner knows his stuff really well or you'll be in the market for a new motor soon.

 

[hotmustang331]

I asked Tim about those HP #s (488 RWHP with like 8 PSI), he said that those #s were dont @ high altitude, and the correction factor sky rocketed the #s. Basically the air is thinner, but the waste gate is letting the boost still build to 8PSI, but the correction factor is not aware of this. (he said about 400-420 on his dyno)

I also sent those guys a few messages, and never got anything back. Customer service flat out sucks, but they sell one sick product. And yes I ALMOST bought the kit last year before I decided to stay N/A. I actually called up Tim to place the order, but the prices happened to go up and I decided it wasnt worth it. Was going to cost around 9K after everything.

 

[jasonh_86]

A buddy of mine with a '93 GT is thinking about ordering a kit from them.. or maybe just a single turbo for his car..

They're a good company, i've seen quite a bit of cars them and they're really sweet setups!

 

[Jackie Chan]

check out the hellion kits as well. I hear they are in stock and ready to ship. all hearsay though. have you asked your shop how much for them to fab up a nice single kit for you? a 60mm turbo is good for 600rwhp(beyond the limits of your motor with stock internals). Just a thought

if your shop can fab up the hot and cold side you could buy your own intercooler, waste gate and turbo and save some cash

 

[Mod Man]

They are a pretty good kit...We are dealers for them...If you have any questions feel free to call us or Pm me I will be more than glad to answer the questions for you. Sometimes its hard to get ahold of them. I think the only down fall to the company is the customer service, but other than that its a pretty well put together kit. They are not to bad to tune. Comes down to the setup that you wanted if you wanted an electronic boost controller it can be a little more trickier to tune with..Cause if the settings aint right you will have either boost spike or the boost will come in to slow. But again I'll be glad to answer any of your questions. Just let us know...If you got a kit through them I think all in all you will be happy with the out come. We have on cobra that is going to be making some serious power here soon. We are using an VT 324 Big Bore Wet sleeve block with 67mm's. See what kind of power we can put down.. Stay tunded for that..hehe. SHould be up in running in 4-5 weeks.. Let us know and good luck!

 

[sgarlic]

I'm going to late this year, or early next year. I'll let you know how it goes then.

Screw paying 8300 for a mongoose.. I'll pay the 6300, install it myself, and tow it to a dyno.