hypothetical question

Engel said:
This is kind of magazine racing but im curious

Ok suppose a sn95 mustang were to race a 370hp integra in the quartermile. What amount of hp would it take the stang to beat the 2600pd integra? The stang weighs 3500pds

With just a peak HP number you can make no logical assumption of the integra's q/m time. Just like the 1000hp dyno queen supra's that still run 12's.

But a guess is the integra would run a 12 - 13, due to the fact that the integra is a 1.8 and cannot flow much air without a lot of boost. So the torque curve is gonna look like mt. everest. So I would say that you would need a full aluminum h/c/i mustang with suspensio, tires and a good driver.
Scott
 
Well having helped built an integra that has 365hp (at only 10psi) I'll tell you it is pretty hard. That car I did is running speeds for a high 7 (1/8 mile).
The thing is that in the 1/4 they get a full pull throughout 3rd gear (the killer honda gear). Seen many a car jump to a big lead till a honda hit 3rd.

Anyway really gonna depend on what is done to the car (seriously big difference in nitrous and turbo hondas).

To try to answer your question if it is a turbo car and he don't up the boost on ya slicks and 325-350hp would to the trick. You would get a hella jump if he was on street tires and be able to hold him off throughout the 1/4.

A lot does rely on driver espically in those cars.

The car me and my friend built wont get traction on the tracks here without slicks and now that he is putting in a 3 bar map and 1000cc injectors its only gonna get faster and time to turn the boost up. LOL

In closing I've drove a 350+hp integra and it was a blasty blast!
 
i can't imagine it would be too hard with a h/c/i combo and some nitrous just in case. you have to figure that they run like 15-16s stock. prolly at best run a mid 12. most h/c/i stangs will run a low 13 high 12 so should be close.
 
ProKiller said:
i can't imagine it would be too hard with a h/c/i combo and some nitrous just in case. you have to figure that they run like 15-16s stock. prolly at best run a mid 12. most h/c/i stangs will run a low 13 high 12 so should be close.

A friends 89 integra ran a 17.2 bone stock with 150k on the odo....didnt burn oil or anything. My only experience with one.
Scott
 
Agreed with Scott. You can't really make an assumption. And yes, the Supra's are dyno queens, but when it comes to the track, they sure can't show it (I hate them, ran into one downdown tonight).




You can look at it like this. Torque gets you there. HP holds you there.