• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

I can pull my key out

  • Thread starter Thread starter Synned
  • Start date Start date Nov 19, 2005
Prev
  • 1
  • 2
First Prev 2 of 2
S

Synned

took tubgirl on a date and got banned
Mar 31, 2005
991
1
0
Philly
Nov 20, 2005
#21
  • Nov 20, 2005
  • #21
Methodical said:
You can keep the original keys only if you still have the code that Ford supposedly provided with the purchase of the car. At least that's what the dealership rep told me. Also, he made it sound like Ford won't have it either. I have not called yet though to verify his statement. Personally, I don't remember ever seeing the key code and I still have everything that I got when I purchased the car. I am still looking for that code. I am weighing my options but I can tell you this I won't be rekeying nothing. I will just have a different key for the ignition. Plus I have the door and alarm remote to open doors and the trunk. PM me if you find out something different.

Peace
Al
Click to expand...

I still have the code. The previous owner ( my grandpop ) gave it to me. I'll take a picture of it for you...
Can they make an ignition cylinder based on a key? I guess not...

 

divit250r

Member
Mar 31, 2005
314
0
16
Columbia City, IN
Nov 20, 2005
#22
  • Nov 20, 2005
  • #22
Dealer list

HISSIN50 said:
What was the dealer price? That was what I explicitly said I was talking about.

I am cheap but try not to play games with locks. If an overseas made one look strudy, I might use it. Otherwise, I would use a Ford piece.
Click to expand...

You're pretty close, depending on the break the parts counter gives you. I have the receipt for mine and list was $45.42 in 2002. No discount from this dealer, unfortunately.

One thing that everyone might want to remember is that in order to keep the same door and trunk locks, the original keys have to be in decent shape. The pattern of peaks and valleys on the keys is staggered. I think the first four and the sixth position are for ignition, and the fifth and last four are for the door locks. So if the key is about wiped out, you'll have to either replace all the lock cylinders, or have two keys for your car.

Scott
 

CManT1914

New Member
Feb 5, 2004
3,172
2
0
Killeen, Texas
Nov 20, 2005
#23
  • Nov 20, 2005
  • #23
94GTLaserRC said:
Good thing to advertise
RC
Click to expand...

 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Nov 20, 2005
#24
  • Nov 20, 2005
  • #24
divit250r said:
You're pretty close, depending on the break the parts counter gives you. I have the receipt for mine and list was $45.42 in 2002. No discount from this dealer, unfortunately.

One thing that everyone might want to remember is that in order to keep the same door and trunk locks, the original keys have to be in decent shape. The pattern of peaks and valleys on the keys is staggered. I think the first four and the sixth position are for ignition, and the fifth and last four are for the door locks. So if the key is about wiped out, you'll have to either replace all the lock cylinders, or have two keys for your car.

Scott
Click to expand...
Nice info Scott! I never considered any issues with rekeying the new lock to the old key in terms of needing special codes or anything - did you encounter that? I have not had any issues in the past with other vehicles. I can see it on a key with a pellet in the key, etc, but not on a plain key.
 

sade04

Member
Sep 13, 2004
97
0
6
Lansdale, PA
Nov 20, 2005
#25
  • Nov 20, 2005
  • #25
matthiasj said:
my black thing spins around, but it wont start the car...i wish it would
Click to expand...


haha mine spins around too, but it doesnt start. im glad it doesnt start. yeah i didnt realize there were soo many out there with a similar problem
 

divit250r

Member
Mar 31, 2005
314
0
16
Columbia City, IN
Nov 21, 2005
#26
  • Nov 21, 2005
  • #26
HISSIN50 said:
Nice info Scott! I never considered any issues with rekeying the new lock to the old key in terms of needing special codes or anything - did you encounter that? I have not had any issues in the past with other vehicles. I can see it on a key with a pellet in the key, etc, but not on a plain key.
Click to expand...

Well, I'd say I got about 90% of what I wanted when I did it. New ignition switch works great. They got close on the door lock portions of the keys. The drivers side has more wear obviously, so it's easier to unlock, once you get the key in. lol It's a little tight. The passenger door and trunk take a wiggle to get the key to release the tumblers, but it all works with one key. If I had the tag shown above, it would probably be a non-issue.

Scott
 

Chythar

Recently finished repairing my rear
20+ Year Stangneter
Aug 26, 2004
2,373
140
113
Foothill Ranch, CA
Nov 21, 2005
#27
  • Nov 21, 2005
  • #27
I'll also join this group - I can take my key out of the ignition while it's running. Can't start the car without it, tho.

I think it has something to do with the shallow notches in the keys. i have a good master key that I make new keys off of. That key, and the ones cut from it, can't be pulled from the ignition. However, after using the key for several months I can then remove it while the car's running. Still works great in all the locks too.
 

xkuntrycowboyx

Member
Mar 31, 2005
281
0
17
Marion, Indiana
Nov 22, 2005
#28
  • Nov 22, 2005
  • #28
Just wanted to chime in, to also having this sweet trick

My thing that spins with the ears on it actually falls off sometimes when i take my key out...then ppl look at me like my car is fallin apart... it's great!
 

Numbles

Active Member
Dec 10, 2003
998
0
36
Chicago, IL
Nov 22, 2005
#29
  • Nov 22, 2005
  • #29
I have they same problem although the prevous owners of my car have tried to solve the problem. I have 3 keys for my car. One for the trunk, drivers door, and ignition. I dont have a key that works on the passenger door. LOL
 

Scott_95GT

New Member
Oct 8, 2004
387
0
0
Sacramento
Nov 22, 2005
#30
  • Nov 22, 2005
  • #30
My friend couldn't pull his key out, and now his girl is 3 months pregnant.
 

Chythar

Recently finished repairing my rear
20+ Year Stangneter
Aug 26, 2004
2,373
140
113
Foothill Ranch, CA
Nov 22, 2005
#31
  • Nov 22, 2005
  • #31
Scott_95GT said:
My friend couldn't pull his key out, and now his girl is 3 months pregnant.
Click to expand...
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Nov 22, 2005
#32
  • Nov 22, 2005
  • #32
Scott_95GT said:
My friend couldn't pull his key out, and now his girl is 3 months pregnant.
Click to expand...
I hope there was not a different key for each lock.
 

Scott_95GT

New Member
Oct 8, 2004
387
0
0
Sacramento
Nov 22, 2005
#33
  • Nov 22, 2005
  • #33
HISSIN50 said:
I hope there was not a different key for each lock.
Click to expand...

 
9

95cobradude

Banned
Apr 1, 2005
194
0
0
long island, ny
Nov 22, 2005
#34
  • Nov 22, 2005
  • #34
sounds like she should put a padlock on there now.
 
Prev
  • 1
  • 2
First Prev 2 of 2
You must log in or register to reply here.

Similar threads

S
01 GT DRIVERS SIDE DOOR LOCK CYLINDER LINKAGE
  • Scwhitten
  • May 13, 2026
  • SN95 4.6L Mustang Tech
Replies
3
Views
162
SN95 4.6L Mustang Tech Jun 19, 2026
melo.timo
M
C
98 gt fuel pressure issues
  • chasecollier1984
  • Jun 2, 2026
  • SN95 4.6L Mustang Tech
Replies
0
Views
85
SN95 4.6L Mustang Tech Jun 2, 2026
chasecollier1984
C
M
Too much for me to repair in my current housing situation
  • My Drama Magnet 04 Gt
  • Apr 1, 2026
  • The Welcome Wagon
Replies
8
Views
297
The Welcome Wagon Apr 14, 2026
Noobz347
D
Question about EGR valve, replacement, and a part on the valve.
  • DPP
  • May 9, 2026
  • SN95 V6 Mustang Tech
Replies
1
Views
132
SN95 V6 Mustang Tech May 23, 2026
DPP
D
B
Electrical Why does my fox body keep frying eecs
  • brandyn200
  • Jun 20, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
261
Fox 5.0 Mustang Tech Jun 25, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?