I hate doing u-joints...

The Green GT

No 13 year olds are safe around me.
10 Year Member
Jan 8, 2006
1,269
19
99
Louisiana
And I do not understand how NOT one store around here has a 12 point 12 mm socket. I had to use a ****ty ratchet wrench and another wrench on it for leverage, and my buddy did the first two and started them in the holes that were not used before. So they had dirt in them and were hard as HELL to get in. It took us a good 30 minutes to get all four DS bolts in. Now my shoulder is sore from being in awkward positions.

And someone needs to come up with a tool that will keep the needle bearings where they need to be so you can put the u-joints on ONLY ONCE. :rlaugh: I swear we had to do one of them like 6 times.
 
I hate doing u-joints...

And by doing U-joints, you mean working on a driveline item or.............?

Sorry Eric. :notnice: :rlaugh:

Sears should have had a 12 pt, 12mm socket for ya. I have had to hunt for some goofy sockets at off-the-wall tool stores before when right in the middle of a project. It sucks.

I do know what you meant about the needles. I'm kind of a bull in a china shop and the greased needles stick to my fingers when I push them back against the wall.
 
We had a ****load of grease in them. And I have a 12 MM ratchet wrench, and a few 12 MM sockets, but no 12 point ones. And noone had them. Thats what made me get the ratchet wrench.
 
They shouldn't have been that hard to put in. You really need to chase the threads if it's that bad before installing them, especially when using the Loctite.

BTW, if you think doing the Mustang's U-joints are bad, I did the joints on my Bronco a couple months ago :nonono: double-cardan joint = :mad: :mad: :bang:
 
My buddy had already started them all. I said he did like two of them, but he put all of them in like halfway and only finished two before making me get under there. lol
 
If this was the stock DS, you might find the DS is out of phase now too. If you have vibes, you could try to index the DS as it was before.