I have an exhaust question - 03 cobra

G

grey03cobravert

New Member

Sep 20, 2006

114

0

0

Mar 16, 2007

#1

• Mar 16, 2007

• #1

ok i got a 03 cobra
490 rwhp 5200
571 rwtq 3500
i got a set of longtubes off my old 99 cobra
will these fit my 03 cobra? same egr fitting?
i got a 2.75 upper and a 6lb lower right now i got stock manifolds, x pips no cats, borla cat back

would i gain or lose going to the long tubes?

if not?

if i get the 2.6 k/bell in the future would it help? thanks!View attachment 395962

 

COBRA90GT

Mustang Master

Sep 22, 2001

6,654

0

87

HOCKEYTOWN ® , MI

Mar 16, 2007

#2

• Mar 16, 2007

• #2

What kind (brand) of longtubes are those from the '99?

You can check the manufacturer's webpage to see if both model years have the same part number for the longtubes - if they do, then you might be in luck...

 

U

Uncle Meat

Banned

Jun 13, 2002

0

1

0

Prattville, Alabama

Mar 16, 2007

#3

• Mar 16, 2007

• #3

Yes they will fit. Same part number for 99 on up Cobra's. You will lose about 1 psi after installing them, but you will see an increase in HP/TQ. The increase will be even more evident if you step up to a twin screw.

Only drawback will be a loss of ground clearence.

U.M.

 

G

grey03cobravert

New Member

Sep 20, 2006

114

0

0

Mar 16, 2007

#4

• Mar 16, 2007

• #4

thanks all. they the dreaded mac's . you think they will be ok since the coating has burned off..? or you think i should use them at all.?

 

COBRA90GT

Mustang Master

Sep 22, 2001

6,654

0

87

HOCKEYTOWN ® , MI

Mar 17, 2007

#5

• Mar 17, 2007

• #5

grey03cobravert said:

thanks all. they the dreaded mac's . you think they will be ok since the coating has burned off..? or you think i should use them at all.?

Click to expand...

I would be very leery of using those MAC longtubes. Seems like you are well aware of their reputation to damage engines. Did your '99 develop any oil consumption issues after you installed them?

If you do plan on using these longtubes, you better be 100% sure that any remaining debris/welding slag/etc inside the headers has been cleaned off.

I wouldn't risk it, but it's your car/wallet...g'luck.

 

G

grey03cobravert

New Member

Sep 20, 2006

114

0

0

Mar 19, 2007

#6

• Mar 19, 2007

• #6

it prob smoked b4 i got it ..i got it used that was the first part to go on..the v/ guides where shot and the pistons rocked in the bores bad , the motor was just plain wore out , in 57k.miles. the cylinders didnt look scored up. just lots of piston rock at t.d.c. i really dont think it was from the headders. but then again what do i know LOL!