I need Help with my 347 stroker

Hi friends, how are you, I need some help with my 77 coupe, I put a 347 stroker kit on my 77 and I want to now if someone can help me. I need tips, inromation, etc, about how can I get max benefit and HP of my 347 stroker, here there are de engine´s specifications:

HEADS:
* 58cc combustion chamber
* 180cc intake runners
* Intake valve diameter:1.94 in.
* Exhaust valve diameter: 1.60 in.
* 3/8 in. screw-in studs
* Valve springs: 1.250 in. dual, 100 lb. seat pressure
* Max lift: .560 in.
* For hydraulic flat tappet cams only

CAM:
Brand: Competition Cams
Product Line: Competition Cams Xtreme Energy Camshafts
Cam Style: Hydraulic flat tappet
Basic Operating RPM Range: 1,800-6,000 RPM
Intake Duration at 050 inch Lift: 230
Exhaust Duration at 050 inch Lift: 236
Duration at 050 inch Lift: 230 int./236 exh.
Advertised Intake Duration: 274
Advertised Exhaust Duration: 286
Advertised Duration: 274 int./286 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.520
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.523
Valve Lift with Factory Rocker Arm Ratio: 0.520 int./0.523 exh. lift
Lobe Separation (degrees): 110
Intake Valve Lash (in): 0.000
Exhaust Valve Lash (in): 0.000
Computer Controlled: No
Grind Number: FS XE274H-10

CARBURATOR:
Road DeamonJr. 625cfm

INTAKE MANIFOLD:
Edelbrock Performer RPM

HEADERS

Compression Ratio is 9.6, in the ignition system I only have a MSD Blaster 2 Coil, and 9mm Ford Racing Spark Plug Wires the other are stock. I want to put on an MSD 6A Ignition Box