• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

I really need to quit.......

  • Thread starter Thread starter junkman306
  • Start date Start date Sep 28, 2009
J

junkman306

New Member
Sep 22, 2009
19
1
3
Sparta, Mo
Sep 28, 2009
#1
  • Sep 28, 2009
  • #1
working on my own crap. I started Friday and after fighting a spring compressor for 2 days, I used a pry bar and finished it last night. I finally got the front Eibach drag springs and Strange adjustable struts on. This is the first time I've ever done more than take a wheel off suspension wise on a car, so I'm fairly proud of myself. ;D It sits oddly low now in the front now and it's lower on the drivers side than on the passenger side. I know I "clocked" them right. Any ideas why ??? The front springs did have 1 coil cut off of them. So far it drives fine, but I'm going to take it Wednesday to have the alignment checked.

Old suspension
View attachment 244157

View attachment 244158

Old spring
View attachment 244159

New springs
View attachment 244160

View attachment 244161

View attachment 244162

View attachment 244163
 
J

Jbauer

New Member
Jan 20, 2008
506
0
0
Sep 28, 2009
#2
  • Sep 28, 2009
  • #2
Could be lower because Eibachs like to sag.. especially since it's been cut 1 coil, that makes it much more prone to sagging.

Unless you forgot a spring cushion thingy or somehow it got un clocked during install.. thats more than likeley the problem.

Good for you man..u did it.

Does the car take off much better than before? does it feel really nice if you launch real hard and can you really feel the lean inside the car? and does it feel safe driving it on the streets?
 
J

junkman306

New Member
Sep 22, 2009
19
1
3
Sparta, Mo
Sep 28, 2009
#3
  • Sep 28, 2009
  • #3
Jbauer said:
Could be lower because Eibachs like to sag.. especially since it's been cut 1 coil, that makes it much more prone to sagging.

Unless you forgot a spring cushion thingy or somehow it got un clocked during install.. thats more than likeley the problem.

Good for you man..u did it.

Does the car take off much better than before? does it feel really nice if you launch real hard and can you really feel the lean inside the car? and does it feel safe driving it on the streets?
Click to expand...

I figured out the leaning issue. I didn't put the front sway bar back on. Some of my buddies have the same setup and call it the "gangsta" lean. I can't tell if it launches any better. I'll have to wait until Friday when i go to the track. You can definitely tell that the front end wants to rise, even taking off normal from a stop light. So far the driveability and feel is different, but fine, even without the front swaybar. Just as long as I don't take corners Indycar style. I've got a friend with the same setup thats put 20,000 miles on his car since doing it and has had no issues with daily driving.
 
N

ninjastang125

New Member
Nov 1, 2008
591
2
0
maryland
Sep 28, 2009
#4
  • Sep 28, 2009
  • #4
if you put just the front springs on you are not going to launch at all. the car will not transfer wieght with the face down and a$$ up
 
J

junkman306

New Member
Sep 22, 2009
19
1
3
Sparta, Mo
Sep 28, 2009
#5
  • Sep 28, 2009
  • #5
ninjastang125 said:
if you put just the front springs on you are not going to launch at all. the car will not transfer wieght with the face down and a$$ up
Click to expand...

I already had the rear Strange adjustable shocks and Eibach springs and airbag on the rear. This weekend I put the Front Strange adjustable struts and Eibach springs on.
 
You must log in or register to reply here.

Similar threads

S
Hello from Minnesota (and the ancient MustangBoards)
  • SpeedofDarkness
  • Aug 24, 2025
  • The Welcome Wagon
Replies
0
Views
182
The Welcome Wagon Aug 24, 2025
SpeedofDarkness
S
Still need an Alignment?
  • from6to8
  • Jun 1, 2025
  • 1994 - 1995 Specific Tech
Replies
3
Views
268
1994 - 1995 Specific Tech Jun 2, 2025
AeroCoupe
6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
4
Views
712
1965 - 1973 Classic Mustangs -General/Talk- Saturday at 9:06 AM
gray owl
G
B
water pump installation questions
  • B0udreaux
  • Feb 5, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
38
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 28, 2026
General karthief
M
Progress Thread mnky99 2001 V6 evap core, ac compressor, heater core replacement
  • mnky99
  • Sep 5, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
441
1996 - 2004 SN95 Mustang -General/Talk- Sep 5, 2025
mnky99
M
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?