• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

If you have an Edelbrock Performer intake get in here!

  • Thread starter Thread starter zZsKyZz
  • Start date Start date May 17, 2008
Z

zZsKyZz

Member
Dec 1, 2005
503
0
17
May 17, 2008
#1
  • May 17, 2008
  • #1
Hey guys,
My 'Stang is seeming to have an idling problem ever since I installed my Edelbrock Performer intake [the older one with the side that comes off]. I think it's a vaccum leak, but I'm not sure. If you guys can please post pictures and information of where you have the hose from your fuel pressure regulator going to and the other hoses on the upper intake manifold I'd really be . It's about summer and I wanna drive this thing!

Thanks!!!!!!!!!!!!!!!!!!!!!!1111111one11!!!!!!!1!!!
 

hollywoodstang

Active Member
May 23, 2006
1,095
2
36
May 17, 2008
#2
  • May 17, 2008
  • #2
It goes to all the same place as the old intake...Why is this confusing?
 

hollywoodstang

Active Member
May 23, 2006
1,095
2
36
May 17, 2008
#3
  • May 17, 2008
  • #3
is this what you mean?
 

hollywoodstang

Active Member
May 23, 2006
1,095
2
36
May 17, 2008
#4
  • May 17, 2008
  • #4
 
Z

zZsKyZz

Member
Dec 1, 2005
503
0
17
May 17, 2008
#5
  • May 17, 2008
  • #5
First off, I had it on there for about 1500 miles and took it off just now to notice this:





My main question is this, where do the hoses go on this?





Third one down is that little hose:



and this one matches one on the same bracket:

 

hollywoodstang

Active Member
May 23, 2006
1,095
2
36
May 18, 2008
#6
  • May 18, 2008
  • #6
think one goes to pcv and skinny black line is for your climate control. it extends from your left all the way to your right and goes to your heater/ac controls.
 

hollywoodstang

Active Member
May 23, 2006
1,095
2
36
May 18, 2008
#7
  • May 18, 2008
  • #7
I can't really describe from your picture. ZOOM OUT a little
 

hollywoodstang

Active Member
May 23, 2006
1,095
2
36
May 18, 2008
#8
  • May 18, 2008
  • #8
 

hollywoodstang

Active Member
May 23, 2006
1,095
2
36
May 18, 2008
#9
  • May 18, 2008
  • #9
FOLLOW THAT PICTURE! the big hose end goes to pcv and there should be a small fitting on the elbow small hose attach to your fuel regulator.
 

hollywoodstang

Active Member
May 23, 2006
1,095
2
36
May 18, 2008
#10
  • May 18, 2008
  • #10
And you need a oil separator for your oil in the intake problem.
 
You must log in or register to reply here.

Similar threads

N
Edelbrock 1405 Setup
  • nathantaylor200
  • Nov 4, 2025
  • Classic Mustang Specific Tech
Replies
3
Views
246
Classic Mustang Specific Tech Nov 5, 2025
nathantaylor200
N
B
Saying Hi
  • BriansNSane
  • Dec 20, 2025
  • The Welcome Wagon
Replies
5
Views
302
The Welcome Wagon Dec 21, 2025
BriansNSane
B
Fox Xtremely high fuel consumption
  • PonyGTrider
  • Apr 11, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 9 10 11
Replies
213
Views
4K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 9, 2026
PonyGTrider
A
Discussion on mild budget build/ top end
  • Acesario
  • Feb 21, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
20
Views
752
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 23, 2026
General karthief
M
Engine Unexplainable Exhaust Pop and Gurgle
  • Mrnissen122
  • Feb 14, 2026
  • Fox 5.0 Mustang Tech
Replies
12
Views
585
Fox 5.0 Mustang Tech Feb 18, 2026
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?