• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

I'm still confused about whl bearings on a '98

  • Thread starter Thread starter search4aztlan
  • Start date Start date Feb 3, 2006
S

search4aztlan

New Member
Nov 19, 2002
171
0
0
Orlando, FL
Feb 3, 2006
#1
  • Feb 3, 2006
  • #1
I've been calling around to get prices on getting my wheel bearings repacked. For the rear:
Service guys have told me that the rears are not servicable since they are lubed internally by the Diff fluid. Others have told me they can be repacked. One Ford service guy told me they can do all four while another said they can't, but it can be my diff and that it can cost anywhere from $100 to $2000 and that I'd just have to bring it in. WTF!?


For the fronts:
I had a couple of service guys, including one from the Ford service dept tell me that the fronts are sealed but they may be re-packed. Two have told me that the hub assembly has to be replaced and that the front bearings can't be repacked.

History: I'm trying to quiet my car down. I hear humming from somewhere while driving and it's difficult to pin-point if it's from the rear or the front. It gets louder the faster I go. It's not terribly loud, but loud enough to have to raise the volume on the radio a couple of points compared to a month ago. I'm aware it can be the diff, but i'm working on a process of elimination. This weekend I plan on getting my wheels balanced.

Forgot to mention: '98GT Convertible, w/ 88,xxx miles and ~11,000 mile old tires.
 

Outlaw97GT

Member
Sep 10, 2005
234
0
16
Redneckville, Tx
Feb 3, 2006
#2
  • Feb 3, 2006
  • #2
I can help ya!

The fronts are hub assembly's, and can't be regreased. price is from 100.00 to 150.00 each to replace.

The rears are axle bearings and are lubed by the gear oil in the rear-end. The price to replace them should be from 150.00 to 200.00 just for labor. If you havent changed gears yet, do it then. And replace all the rear-end bearings, axle, carries, pinion, new diff clutches ect. ect.

I just got my whole rear-end rebuilt a couple weeks ago, and It cost me 700.00 total parts/labor. And that included the new 4.10's, diff clutch kit, all bearings.
 

DropTopPony

Noob Slayer
Founding Member
Aug 13, 2002
2,570
3
48
south jersey
Feb 3, 2006
#3
  • Feb 3, 2006
  • #3
What he said ^^^^
I had that humming sound a few years ago myself and it turned out to be the gears. Do you have a rear diif leak? or have you checked fluid level? My rear was leaking and my driveway was stone so i never even noticed. As i drove it got lower and lower until the gears weren't covered enough and started to hum. I had new gears, new diff, new axles installed since i was in there. So check your fluid.
 

Mike97gt

it doe snot
Founding Member
Jan 26, 1999
10,633
7
89
the people's republic of massachusetts
Feb 3, 2006
#4
  • Feb 3, 2006
  • #4
somebody said all the bearings can be repacked wow thats a rape joint. send the people you dont like to them
 
You must log in or register to reply here.

Similar threads

Drive Shaft/Rear Diff Issue on 2014 GT
  • DudeStang
  • Jun 16, 2025
  • 2010 - 2014 Specific Tech
Replies
11
Views
1K
2010 - 2014 Specific Tech Jan 21, 2026
gkomo
A
2001 Mustang GT, scorched metal smell and noise from trans/diff?
  • AndyE2255
  • Dec 1, 2025
  • SN95 4.6L Mustang Tech
Replies
4
Views
469
SN95 4.6L Mustang Tech Dec 28, 2025
gkomo
Progress Thread 91GTstroked 90 7 up convertible build
  • 91GTstroked
  • Apr 18, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
332
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 22, 2026
91GTstroked
B
Engine Strange Noise
  • burntokita
  • May 8, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
406
Fox 5.0 Mustang Tech May 11, 2026
keel
Suspension Harsh Ride
  • PonyGTrider
  • Mar 20, 2026
  • Fox 5.0 Mustang Tech
  • 2 3 4
Replies
62
Views
2K
Fox 5.0 Mustang Tech Apr 11, 2026
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?