87_LX_5.0 Active Member Aug 24, 2010 142 23 29 Uniontown, PA Sep 5, 2013 #1 Sep 5, 2013 #1 Do you have to remove the fender to remove the plastic inner liner? May take them out to clean up a bit if it isn't too much of a pain.
Do you have to remove the fender to remove the plastic inner liner? May take them out to clean up a bit if it isn't too much of a pain.
madspeed Colonel Mustard Founding Member Nov 29, 1999 8,914 1,332 204 a van down by the river Sep 5, 2013 #2 Sep 5, 2013 #2 no you dont need to remove the denders. Once you find all the hidden dirt filled screws, there is enough flex in the liner to manipulate it out
no you dont need to remove the denders. Once you find all the hidden dirt filled screws, there is enough flex in the liner to manipulate it out
Mstng93SSP You have a nice rear end there Dave. 15 Year Member Nov 29, 1999 2,993 3,500 184 Mililani, Hawaii Sep 6, 2013 #3 Sep 6, 2013 #3 There will be a lot of pulling and tugging, and you will feel like you are going to break something but then it will usually just pop out.
There will be a lot of pulling and tugging, and you will feel like you are going to break something but then it will usually just pop out.
MikeH686 Mine is only two inches though. 10 Year Member Oct 11, 2011 2,843 1,753 184 Waldorf, MD Sep 6, 2013 #4 Sep 6, 2013 #4 Yeah and smack you in the face as well so watch out
mikestang63 SN Certified Technician Aug 27, 2012 11,606 8,859 214 In the garage Sep 6, 2013 #5 Sep 6, 2013 #5 remove the wheel first....
madspeed Colonel Mustard Founding Member Nov 29, 1999 8,914 1,332 204 a van down by the river Sep 6, 2013 #6 Sep 6, 2013 #6 Thats true experience talking right there