Installed Spec Stage 2 and Headers, got some problems! HELP!

[Drew1287]

I got finished installing the Spec stage 2 and my FRPP Ceramic coated headers. I love the way the clutch feels, but I get a BAD vibration in the clutch pedal. If I even touch the pedal it stops completely. I think the cable is too loose, but what cable/quadrant/adjuster combo would let me tighen it up slightly? Also I gotta say headers are a 'Kiss Me''Kiss Me''Kiss Me''Kiss Me''Kiss Me''Kiss Me'! I installed them over 3 days, 6 hours per side. I didnt have any tool to tighten 2 of the back bolts on the drivers side header, I have a major leak. I will try bringing it to a ship to see if they will go over them and tighten them. What you guys suggest?

 

[walker887]

did you snap the pedal up and lift the pedal , I know you probally did but had to ask.
Most SPEC's I have installed have a slight chatter that goes with time , but not that bad
Don

 

[Drew1287]

The clutch isnt chattering, when the clutch is engaged and my foot is off the pedal, the PEDAL vibrates. If i touch the pedal even it stops all the vibration.

 

[Drew1287]

Nobody?

 

[StangLou]

It does soudn like you have a little extra slack in the clutch cable. An adjustable clutch cable wouldnt hurt, my shop recommended one with the install when I told them I want a Spec 2 installed at the same time as my L/T's and midpipe.