installing 5" tach...help

brent_cosenza

New Member
Jul 17, 2006
70
0
0
Georgia
i bought a 5" type r tach with a shift light...i need to know where to get the tach signal..and how to hook up the wires..there a big yellow one and a big red one on the back of the shift light...and a big yellow and big red on the back of the tach..and then theres little black, green and red wires on the tach..and the tach changes colors..in case that matters...
 
It didn't come with instructions? Unless you have tons of mods expect to see "ricer" used a lot. 5" tachs shouldn't be in domestics unless it's strictly a drag car. Not a daily driver imo.
 
AmBo said:
It didn't come with instructions? Unless you have tons of mods expect to see "ricer" used a lot. 5" tachs shouldn't be in domestics unless it's strictly a drag car. Not a daily driver imo.


I don't have alot of mod's....I just like to know what my engine is actually doing instead of looking at a "ballpark figure" gauge...maby the newer stang's are more accurate but my stock tach is off compared to my 5"
 
I don't know about Type R tachs but check with Autometer to see if they have instructions.

I don't know about the shift light but the red, black and green are red is a + source, black a negative and green goes to your distributor connector. At least that's on my race car. I don't know about EFI engines :)