Installing Intake/Exhaust valves hard?

Y

Yellowpnoy

New Member

Feb 6, 2006

203

0

0

Sep 2, 2006

#1

• Sep 2, 2006

• #1

I am in the market for a set of heads for my motor i am having built, and was wondering how hard it is to install intake and exhause valves in heads? I know i will need an valve spring compressor, but what else is needed? Comp makes a valve train kit, with springs and titanium retainers, what else do i need to do it, and is it something the average guy can do?

Anthony

 

B

BadAndy

Founding Member

Feb 21, 2001

766

0

0

Ohio

Sep 2, 2006

#2

• Sep 2, 2006

• #2

the heads should come with the valves in them

 

Tonys96Cobra

professional deer "mounter"

Oct 28, 2005

19

9

29

Syracuse

Sep 2, 2006

#3

• Sep 2, 2006

• #3

As long as youve got the correct springs to match the head, its no big deal.

 

R

R2D2

Sep 2, 2006

#4

• Sep 2, 2006

• #4

your all forgetting the most important issue, Installed Spring Height. need a spring mic to measure installed height and then adjust it with hardened shims. Just slap some springs on and see what happens

 

RYC CUKR

Founding Member

May 19, 2002

1,437

1

38

Orlando

Sep 2, 2006

#5

• Sep 2, 2006

• #5

sbftech said:

your all forgetting the most important issue, Installed Spring Height. need a spring mic to measure installed height and then adjust it with hardened shims. Just slap some springs on and see what happens

Click to expand...

Very true.

When I swapped out the springs on my P heads the kit that I got had a little tool to check the installed height of the springs and then you could adjust with the shims. It was the trickflow kit for Ford iron heads. Went on pretty smooth.

 

Y

Yellowpnoy

New Member

Feb 6, 2006

203

0

0

Sep 3, 2006

#6

• Sep 3, 2006

• #6

Ok, thanks guys! I know most heads come with valves already installed, but i was looking at set of bare heads Thanks for the info!! I think i am gonna try it!

Anthony