I picked up a 94/95 cobra intake and 65mm tb. Was thinking heads, but how about a cam instead. I want a no tune setup. I called ford and they suggested a cam in the 215 - 218 durration hi lift 540 and 112 lobe center. Then I called crane and said I wanted a cam for a stock motor with an intake and I wanted no computer troubles. The suggested the 2030. revs to 5500, 17"vac at 750rpm idle. intake 216 durration 533 lift 220 exhaust 544 lift 112 lobe center. Sounds like a good match. What do you think? anything better out there for a every day driver looking for torque? I though I might as well slip in hte cam while I have the intake off.