Intake Elbow

94GTCoupe · May 29, 2008

will any intake elbow fit an explorer intake?i'm going to replace my radiator this weekend and figured i might as well install the intake i've had sitting around since i have to drain the coolant.there's a guy here locally who has an elbow for sale.i dont know the brand or price,he emailed me while i was at work.

also,what would be a fair price for a used elbow,considering the price's new?
Brothers-professional products=$60,edelbrock=$120
CJ's-trickflow=$97(bare).

blksn955.o · May 29, 2008

Any one should work fine.

I run a Perf. Prod. one on my exploder intake. Just be prepared for one ROUGH casting with the PP elbow...man that thing must have been cast by a blind 8yr old who made the mold out of dirt/mud. I sanded the tar out of my elbow as I had it powdercoated to match my upper intake. That was the only reason I went with the PP elbow...I had every intention of sanding/grinding it and getting it coated.

94GTCoupe · May 29, 2008

thank's.may have to wait til next week to change my radiator.i'll need to order the perf. prod elbow,the guy here tried to sell me the explorer elbow.i cant find anything here locally.

blksn955.0,is this the one you have?and do i need the egr adapter?
http://www.brothersperformance.com/catalog/product_info.php/cPath/1_9_829/products_id/3769

earleys94gt · May 30, 2008

Just FYI in case you were looking at the Trick Flow elbow, it is 75mm.

I think the PP, Edelbrock etc. are all 70mm????

Kr33p · May 30, 2008

davis3 said:
thank's.may have to wait til next week to change my radiator.i'll need to order the perf. prod elbow,the guy here tried to sell me the explorer elbow.i cant find anything here locally.

blksn955.0,is this the one you have?and do i need the egr adapter?
http://www.brothersperformance.com/catalog/product_info.php/cPath/1_9_829/products_id/3769

PM Sent

Venom351R · May 30, 2008

blksn955.o said:
Any one should work fine.

I run a Perf. Prod. one on my exploder intake. Just be prepared for one ROUGH casting with the PP elbow...man that thing must have been cast by a blind 8yr old who made the mold out of dirt/mud. I sanded the tar out of my elbow as I had it powdercoated to match my upper intake. That was the only reason I went with the PP elbow...I had every intention of sanding/grinding it and getting it coated.

I got the Trick flow elbow and the casting is very nice, no spurs or rough edges.

blksn955.o · May 30, 2008

You will only need the adapter if your running an intake spacer or an intake that the upper sits higher than stock. With the explorer intake you will not need the adapter if your not running a spacer.

94GTCoupe · May 31, 2008

i dont plan on a spacer,but if i get the intake elbow i'll get the adapter just in case later down the road i decide to use a spacer.

Intake Elbow

94GTCoupe

blksn955.o

94GTCoupe

earleys94gt

Active Member

Kr33p

New Member

Venom351R

blksn955.o

94GTCoupe

Similar threads

Intake Elbow

Active Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency