Intake Fastener Sizes

[Skoobie]

Hey everyone. Its been a while since I've posted but I need some help finishing up an OLD project. I broke a bolt in my lower intake a couple years ago and am now just getting around to fixing it. My question is what size is the bolt for the lower intake. Im specifically looking for the front most left bolt if you are looking at the motor. Any help would be appriciated, thanks in advance

 

[Skoobie]

Well after we pulled everything I had a couple streched bolts as well so we are going to go with a whole new set of fasteners for the upper and lower. Does anyone have a link to the fastener sizes or perhaps a fastener kit for the upper and lower intakes?

 

[Skoobie]

Bump. No one huh?

 

[Busted07]

http://cgi.ebay.com/ebaymotors/MUST...W-WASHERS_W0QQitemZ140088537145QQcmdZViewItem


that work for ya?

 

[Skoobie]

Nice but I think those are just the lower intake bolts. I've been able to locate those locally, its the upper ones im having trouble with

 

[Busted07]

Hey everyone. Its been a while since I've posted but I need some help finishing up an OLD project. I broke a bolt in my lower intake a couple years ago and am now just getting around to fixing it. My question is what size is the bolt for the lower intake. Im specifically looking for the front most left bolt if you are looking at the motor. Any help would be appriciated, thanks in advance

From how i read that, you were looking for the lower bolts.

 

[Skoobie]

Well after we pulled everything I had a couple streched bolts as well so we are going to go with a whole new set of fasteners for the upper and lower. Does anyone have a link to the fastener sizes or perhaps a fastener kit for the upper and lower intakes?

Yeah it started out with just the lowers until we got it apart and I noticed a couple upper bolts were streached. Don't get me wrong, I still appriciate the link I asked the seller if they carried an upper set as well, we'll see.