• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Intake Install. No Heat!?

  • Thread starter Thread starter OL' WHITEY
  • Start date Start date Oct 19, 2005

OL' WHITEY

New Member
Jan 28, 2004
273
0
0
Weddington, NC
Oct 19, 2005
#1
  • Oct 19, 2005
  • #1
Last March, I had a local performance shop to install a Cobra intake on my ride. I noticed that after the install, my heater didn't put out much hot air. It was spring and warmer weather was on its way. I just assumed they put in a 160 degree thermostat and that was the reason for my cool air. All summer it wasn't an issue. Now it is getting cooler in the mornings and I thought a little heat might be nice. I just changed out the thermostat to a 195 degree last night and still no heat this morning. Any ideas on what could be causing this?
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Oct 19, 2005
#2
  • Oct 19, 2005
  • #2
Dirt or sediment in the feed pipes for the heater? I would disconnect the heater hoses and try a garden hose flush through the tubing and heater. Check the vacuum lines and flapper doors for the heat & A/C while you are at it.
 

OL' WHITEY

New Member
Jan 28, 2004
273
0
0
Weddington, NC
Oct 19, 2005
#3
  • Oct 19, 2005
  • #3
Thanks, jrichker,

That was going to be my next plan of attack. I guess you just take the one big fitting off the top of the manifold and take the other hose loose from the pump and flush through the metal piping and all? I'll try that and we'll see what happens. I'll let ya'll know what I find. Meanwhile, if anybody else has any suggestions, I'm all ears!
 

OL' WHITEY

New Member
Jan 28, 2004
273
0
0
Weddington, NC
Oct 21, 2005
#4
  • Oct 21, 2005
  • #4
Okay, problem solved. The heater core was a little clogged up. Put the water hose to it and flushed it out. I got heat again! Yeah baby!
 
You must log in or register to reply here.

Similar threads

Engine Themostat
  • Mindseye007
  • Jan 30, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
21
Views
1K
Fox 5.0 Mustang Tech Feb 1, 2026
86HO5.0
8
Engine Bleeding air in the heater core
  • keel
  • Apr 2, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
389
Fox 5.0 Mustang Tech Apr 23, 2026
limp
N
Need stainless carb heat shield
  • newmex999
  • Aug 29, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
2
Views
203
1965 - 1973 Classic Mustangs -General/Talk- Sep 13, 2026
Mcmahst
B
Fuel 1990 installing edelBrock intake
  • Beaker
  • Oct 5, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
334
Fox 5.0 Mustang Tech Oct 6, 2026
Noobz347
M
Resolved 1988 Foxbody - Overheating Summer
  • MDrisc
  • Oct 26, 2025
  • Fox 5.0 Mustang Tech
Replies
16
Views
1K
Fox 5.0 Mustang Tech Jul 17, 2026
fasterthangas
F
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?