intake manifold and cam

[meric0786]

what cam and intake manifold will give me the most power from idel to about 6000 to 6500 rpms. It is a work 347 stroker with everything except a supercharger or nitrious. its a street racer and $ doesnt matter

 

[Grn92LX]

What heads? I recommend a TFS R or an edelbrock victor 5.0 with a 75mm TB. I recommend jay allen or ed curtis for a cam. I'm gonna use jay if I ever do another combo.

Post your full combo, plans and goals.

 

[meric0786]

all my mods are
347 stroker kit
victor jr alminum heads
70mm mac tb and egr
mac fender well cold air kit
mac 1 3/4 long tubes with 3 ince collectors
dr gas x 3 inch x pipe
spintech side exit 3 inch exhaust
3.73 rear
24# injectors with a 255 lph fuel pump
msd distributor
crane cams ignition box
9mm plug wires
march underdrives
no smog pump
electric fan
130 amp alt.
now i need an intake manifold and cam set up i also need a mass air conversion.
can i get the mass air flow conversion form a junk yard?
now i want the best intake and cam for these mods i want to get the most performance