intake/throttle body hp

[noslow86]

will i feel i differance with trick flow street intake and lower and a 70 mm throttle body. i already have 3.73 gears/pulleys/a/c delete/smog pump delete/hyper tech chip/mass air conservion/full exhaust/cold air induction/flex lite fan/180 stat

 

[luckythirteen13]

youll get some hp, maybe 15 from both if your lucky but with stock heads you wont see the full potential of any of your mods

 

[legalize420]

will i feel i differance with trick flow street intake and lower and a 70 mm throttle body. i already have 3.73 gears/pulleys/a/c delete/smog pump delete/hyper tech chip/mass air conservion/full exhaust/cold air induction/flex lite fan/180 stat

go with a 65 mm tb. the 70 is to big IMO. im switching from the 70 to a 65 as soon as the package arives.

 

[OL' WHITEY]

Check my sig. I've got the 70mm. I like it just fine. I picked up about 15 hp by bolting on a Cobra intake and 1.7 rr's. You'll see about the same. Heads will be the bottle neck now,not the intake.

 

[Daniel50]

70mm throttle body is to big with that small setup. a 65 is all you need. even with heads you a 65 will not hurt you

 

[Grn92LX]

70mm tb is fine. Gping to a smaller 65mm tb would waste money and zero gain. Keep the 70, though i'd personally do a 75mm since that what matches the inlet.

I'd expect 12-15hp with the tb and manifold with gains from 3000 and up. Might lose a tad under 3000, but who cares.