Intake VS

Y

Yellwstang21

New Member

Sep 27, 2004

30

0

0

Jun 17, 2005

#1

• Jun 17, 2005

• #1

Real quick question for everybody, which intake is "better" for a roller block 302:

RPM?

RPM Air-Gap?

Weiand Stealth?

Cam will be custom along with AFR 185 heads


Thanks,
Artie

 

2bav8

Founding Member

Nov 30, 1998

2,511

1

47

Mesa, AZ

Jun 17, 2005

#2

• Jun 17, 2005

• #2

All will work just fine.
For the money I'd rather use the Weiand Stealth if a single plane intake wasn't an option. Sure works well with my 185 AFRs

 

Y

Yellwstang21

New Member

Sep 27, 2004

30

0

0

Jun 17, 2005

#3

• Jun 17, 2005

• #3

Still want the car to be streetable and im not sure how much room single planes take up nor really know anything about them at all.

 

T

TT670

Founding Member

Jul 10, 2001

360

9

28

Jun 17, 2005

#4

• Jun 17, 2005

• #4

With the AFR 185s....Stealth..or even a vic jr would probably do well, the cam and carb tuning will play a bigger role in the streetability. Have you chosen a cam yet? For off the shelf cams the Comp XE274HR is a sweetheart . Can you be more specific in your application, gears, transmission, intended use and expectations?

 

Y

Yellwstang21

New Member

Sep 27, 2004

30

0

0

Jun 17, 2005

#5

• Jun 17, 2005

• #5

Lets see more specific.....

My gearing out back is a 3.73 posi and my tranny is a t-5. The T-5 will only be in there until/if I break it then it will be a G-Force t-5.

This car will be my night cruiser/strip car. It wont be my daily driver. As for the cam, I am going to have a custom cam made once I figure out my intake set-up. I want the car to be pretty aggressive but still streetable. Thats about it .... =)

 

65ShelbyClone

Founding Member

Sep 9, 2000

4,675

38

119

Antelope Valley, SoCal

Jun 17, 2005

#6

• Jun 17, 2005

• #6

Since it wont be a daily driver, I would consider a mild single plane to go with big heads like the 185s. I have a Weiand X-Celerator that will go on my roller 302 in the '68 and I had one on my previous '65 289 also. The bottom end was a little soft, but by no means unstreetable and the high rpm power came on like a 2-stroke bike.

 

TampaStang

New Member

Feb 29, 2004

67

0

0

Tampa, FL

Jun 18, 2005

#7

• Jun 18, 2005

• #7

I can vouch for the Comp Cams XE-274HR. I run that on a set of Edelbrock Performer 5.0 heads (1.90/160) with 1.6 R/R, Performer RPM Intake and a Holley 600dp. 2400 stall, AOD w/3.80's. It moves. Havent been to the strip yet but she gets up and goes!

 

T

TT670

Founding Member

Jul 10, 2001

360

9

28

Jun 18, 2005

#8

• Jun 18, 2005

• #8

If youre going with a custom cam from someone like Ed Curtis or Buddy Rawls its probably in your best interest to talk your application over with the cam designer.. You should buy an intake to match the cam rather than vice versa.

 

washMO66

Founding Member

Oct 30, 2001

1,000

0

37

Washington, MO

Jun 18, 2005

#9

• Jun 18, 2005

• #9

Yellwstang21 said:

Still want the car to be streetable and im not sure how much room single planes take up nor really know anything about them at all.

Click to expand...

Vic Jr on a 66 with NO carb spacer will clear with a 2.5" high filter or less.... barely. Not sure about manners on a 302 but on a 347 it is no problem whatsoever.

Throw on a carb spacer of any size and it won't fit...

Stroke that 302 and THEN use that COMP XE274HR. Seems to go real good with my AFR185's.

PS - by tomorrow I won't be able to say MY AFR's or my Stroker or my Vic JR or my coupe......SOLD.........

 

65ShelbyClone

Founding Member

Sep 9, 2000

4,675

38

119

Antelope Valley, SoCal

Jun 18, 2005

#10

• Jun 18, 2005

• #10

washMO66 said:

PS - by tomorrow I won't be able to say MY AFR's or my Stroker or my Vic JR or my coupe......SOLD.........

Click to expand...

OT-I know how that feels. I just sold my '89 about ten minutes ago.

 

Y

Yellwstang21

New Member

Sep 27, 2004

30

0

0

Jun 18, 2005

#11

• Jun 18, 2005

• #11

I am not gonna stroke my motor this time around washMo. Ive decided to just get a roller 302 and build one of those without stroking. When I gain more knowledge and know-how then I will go for the stroker ;-)

 

rbohm

Founding Member

Apr 12, 2002

6,698

550

204

tucson,az

Jun 19, 2005

#12

• Jun 19, 2005

• #12

as was stated, best you decide on teh cam first, then get an intake to compliment it. same with headers. even though most of your horsepower is in the heads, for the most part, the cam is the brains of the operation, and everything needs to work with the cam.

 

D

D.Hearne

New Member

Sep 29, 2000

11,730

6

0

south louisiana

Jun 19, 2005

#13

• Jun 19, 2005

• #13

Why be like everyone else, my repop Ford dual plane 3x2 works extremely well on my Canfield headed roller 331

 

69Rcode_Mach1

Active Member

Apr 20, 2004

1,473

1

37

Salt Lake City, Utah

Jun 19, 2005

#14

• Jun 19, 2005

• #14

He could use a Weiand Xcelerator or a Victor Jr. those will net him the most power. Problem is with the 185's on a 302 he will have to scream higher to really tap into the power of the heads. AFR 165's would probably fit better, but the 185's will give him room to grow in the future which seems like a better choice to me, that is why I got victor jr.'s for my car. So if you ask me get a single plane and be ready to spin that engine up.