Intro

R

rrbrucea

New Member

Jul 31, 2009

12

0

0

North Carolina

Jul 31, 2009

#1

• Jul 31, 2009

• #1

Hey all, I'm a newbie here. My step-daughters just inherited their dad's '67 coupe. 289 3 speed and red on red. Not a bad car, but it's been neglected mechanically.

Hope y'all can put up with a bunch of questions while I get this thing sorted out.

Is the only way to post pics by using a photo host like PhotoBucket or something?add pics

 

dls322

Member

Apr 4, 2005

149

0

16

Mt. Penn, PA

Jul 31, 2009

#2

• Jul 31, 2009

• #2

Welcome!!!!

 

R

rrbrucea

New Member

Jul 31, 2009

12

0

0

North Carolina

Jul 31, 2009

#3

• Jul 31, 2009

• #3

Here's some pics. It was pretty dusty from sitting out and the engine is a total greaseball. Right now the game plan is to get it reliable and hit some of the local cruise nights with it. Eventually want to do a whole new interior and rebuild things as necessary--front end, engine, etc.

 

66sprint6

Member

Oct 5, 2005

131

1

17

Jul 31, 2009

#4

• Jul 31, 2009

• #4

Looks like a good car to start with. Good game plan too, get it reliable and start having fun!!!
Matt

 

R

rrbrucea

New Member

Jul 31, 2009

12

0

0

North Carolina

Jul 31, 2009

#5

• Jul 31, 2009

• #5

Yep, already put a new carb on it. The radiator is next--it's peeing on my garage floor. After that who knows? The car is really suffering from sitting unused and unloved for quite a few years...

 

tx65coupe

Active Member

Nov 29, 1999

1,551

1

37

Jul 31, 2009

#6

• Jul 31, 2009

• #6

That looks like a good Mustang to start with. Hopefully, you can get the mechanical bugs worked out. Whats the list of things actually wrong with it right now?

As far as the peeing on the garage floor, it may just be as simple as installing an overflow tank / coolant recovery tank. These classic Mustangs didn't come with them. That may be all that is really going on.

If it has sat for years, the gas tank is probably needing to be replaced. Thats not a hard project and its only about 100 bucks.

 

wicked93gs

15 Year Member

Sep 30, 2006

1,198

228

93

Nashville TN

Aug 2, 2009

#7

• Aug 2, 2009

• #7

thats a much better base than what I started with, its a nice car...though at this point the engine probably needs to be gone through with a rebuild(mainly to replace all those leaky 40 year old gaskets) rebuilds really arent difficult, but they are tedious....but all that is down the road...start with the puking radiator issue and work from there

 

R

rrbrucea

New Member

Jul 31, 2009

12

0

0

North Carolina

Aug 3, 2009

#8

• Aug 3, 2009

• #8

The radiator definitely has a leak, I can see it at the bottom of the core. Did these cars all come with radiator shrouds? If so, it's missing.

The other frustrations are all four window regulators are acting up. I THINK I have the driver's door pretty well straightened out, so only three more to go!

Both doors were acting up too--driver's door wouldn't open from the outside but after some time spent scraping knuckles and performing contortions it's working from inside AND outside. The passenger door however won't open from either the inside OR the outside.

Finally, do y'all have a "preferred" vendor? I have a Virginia Classic Mustang catalog, and their prices are good, but was wondering if they are good people to deal with and deliver the goods. Apologies in advance, but I've been a Mopar guy my whole life and know the good and bad vendors there. So the Mustang thing is pretty new to me and I want to be careful about who I spend the girl's $$$ with fixing this car up for them.

Thanks for the warm welcome! And just for grins, here's a pic of what I like to do with my spare time--sorry it's a Mopar, but I DO have some Mustangs on the list--including this '67 coupe.

 

R

rrbrucea

New Member

Jul 31, 2009

12

0

0

North Carolina

Aug 3, 2009

#9

• Aug 3, 2009

• #9

Oh, as for the list of what really needs to get done to the car "right now", the radiator would top the list. I've replaced the carb. It could probably use a tune up.

After that I need to get the passenger door working and all the window regulators. That's it for now.

Not sure about the gas tank. SO far there's been no trouble there. Knock on wood!

 

tx65coupe

Active Member

Nov 29, 1999

1,551

1

37

Aug 3, 2009

#10

• Aug 3, 2009

• #10

These classic Mustangs did not all come with shrouds. I would add a shroud to it. I think it may have only been on cars with AC or some other option. Most I have seen didn't come with a shroud.

As far as vendors go, Virginia Mustang is a good place. I also like NPD, Mustangs Unlimited, Mustangs Plus, and Paddock. Mustangs Plus seems to have some restomod type parts that others don't. There is also CJ Pony Parts which offers good prices and often free shipping, but sometimes it takes a while to get your order.

Even if the gas tank doesn't seem to have any issues, you may be surprised at whats inside.

Thats a cool Cuda rendering.

 

jlangholzj

Mustang Master

Oct 23, 2006

248

31

93

MI

Aug 3, 2009

#11

• Aug 3, 2009

• #11

mmmm 71' cuda....... mopar ftw!

I'm more of a super-bee kinda fella myself

 

R

rrbrucea

New Member

Jul 31, 2009

12

0

0

North Carolina

Aug 4, 2009

#12

• Aug 4, 2009

• #12

Thanks guys. That Cuda belongs to NASCAR racer Mike Bliss. The wheels are custom billet 20s cut by the guy you used to see on American Hotrod...