IRS ABS Sensor bolt specs???

[BennyBlown2v]

I'm swapping an 04 IRS into my GT this week and the ABS sensors I ordered from Ford didn't come with the mounting bolts. What are the dimensions on those bolts so I can go to NAPA and buy some? I realize they won't have the internal/external torx combination that the stock bolts are, but that doesn't matter.

Thanks if anybody can help!

 

[white99gt]

I'm swapping an 04 IRS into my GT this week and the ABS sensors I ordered from Ford didn't come with the mounting bolts. What are the dimensions on those bolts so I can go to NAPA and buy some? I realize they won't have the internal/external torx combination that the stock bolts are, but that doesn't matter.

Thanks if anybody can help!

Just use the ones out of the stock gt ones.

While the IRS is out you may want to think of adding at LEAST a billet flow IRS brace.Plus adding bushings wouldnt hurt either.Esp to firm up the handling.

 

[BennyBlown2v]

Thanks I'll check and see if they fit. Yeah, I have MM poly subframe and diff bushings in there already. I'll get a diff cover brace when I get a blower and just not launch hard till then, and control arm bushings when I have more money.

 

[BennyBlown2v]

Ok so I'm almost done with the swap. Basically just have to raise the IRS in place and bolt it up and I'm done. BUT, the GT ABS sensor bolts DO NOT fit, they are like 50% too small. Does anybody know the correct size??? Or the part number or something so I can order them or look them up??

 

[tomustang]

Best bet is calling a dealer and asking them, unless someone knows

 

[BennyBlown2v]

I found a bolt off the GT that is the right threading and diameter, gotta get the good-'ol slide caliper and depth guage out and go buy new bolts tomorrow.