Is a 5.0 Gauge Cluster the same as a 2.3

roadrunner19va · Sep 26, 2006

I have a 1991 Mustang 5.0. My gas gauge and temp gauge do not work (they worked when I purchased it). I know the speedo and Tach are different. Are the other gauges the same between a 5.0 and a 2.3 (volts, oil pressure, gas, water temp)? I can get a gauge from a 1993 4 cyl. for free. If I swap the Tach and Speedo to the 4 cyl Cluster. Will it work in a 5.0? Let me know. Thanks Travis

Roland69 · Sep 26, 2006

I think you can use your tach and speedo on a 4cyl cluster from what I have been told and seen on how they come apart....but it might not be your gauges maby it's the temp sensor and sending unit

poneypower89 · Sep 26, 2006

do any of the 4banger clusters go to 140???? would u really wanna sacrifice ur speedo rating? I thought the 4 bangers were all limited to 85

afast93stang · Sep 26, 2006

You can use the 4cyl housing in your 5.0 along with the temp, oil, gas etc. As for the tach it will read half of what it should be. Putting in the 5.0 tach and speedo will just snap right in w/o any problems.

I have done this, I first put a 140 speedo in my 4cyl coupe. Then when I did my swap I had to get a 5.0 tach but it snapped right in and has worked for the past 4 years.

Both the 85 and 140 speedos use the same connector to the speedo cable and are intechangable.

thehueypilot · Sep 26, 2006

afast93stang said:
You can use the 4cyl housing in your 5.0 along with the temp, oil, gas etc. As for the tach it will read half of what it should be. Putting in the 5.0 tach and speedo will just snap right in w/o any problems.

I have done this, I first put a 140 speedo in my 4cyl coupe. Then when I did my swap I had to get a 5.0 tach but it snapped right in and has worked for the past 4 years.

Both the 85 and 140 speedos use the same connector to the speedo cable and are intechangable.

The tach will read double what it should. I still have the 4 cyl cluster in my car but I run a seperate tach so I just ignore the false reading but all the other instruments read good.

afast93stang · Sep 26, 2006

thehueypilot said:
The tach will read double what it should. I still have the 4 cyl cluster in my car but I run a seperate tach so I just ignore the false reading but all the other instruments read good.

Thanks for the correction, its been a while since ive had to think about it

thehueypilot · Sep 26, 2006

Looks like we have modified the same year and model and engine size car.....small world.

roadrunner19va · Sep 26, 2006

Mustang gauges

Thanks for the reply. I went and got the 1993 4 Cyl. Cluster. I swapped my 5.0 Tach and Speedo into the 4 Cyl housing. Everything works perfect. My original gauges (gas, temp, oil, volts) worked until I did the white face install. once I did the install the gauges would stick every once and a while until I tapped the housing. one day they just quit working (Gas, Temp). I replaced them with the 4 cyl. cluster And now they all work again. Easy fix. Thanks for all of the help. If anyone needs info on how to do this let me know. Thanks Travis

Is a 5.0 Gauge Cluster the same as a 2.3

roadrunner19va

New Member

Roland69

Sergeant Tangnet

poneypower89

Now everyone in the world will know I wanna bang t

afast93stang

thehueypilot

Active Member

afast93stang

thehueypilot

Active Member

roadrunner19va

New Member

Similar threads

Is a 5.0 Gauge Cluster the same as a 2.3

New Member

Sergeant Tangnet

Now everyone in the world will know I wanna bang t

Active Member

Active Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency