Is Grady in the house?? a few Tweecer ? 4 ya...

C

Charlie Allen

15 Year Member

Jan 7, 2008

60

0

7

Dec 14, 2008

#1

• Dec 14, 2008

• #1

Installed my RT Tweecer today. First, I printed all 47 pages of the manual and read it, some pages several times. Installed the drivers and verified all locations on my lap top. Plugged in the tweecer and the switch and downloaded the FORD EEC and all of the functions to all 4 of the switch settings.. 48kb download. The car will only start with the switch in the OFF position! When in data logging, the calibration console, "dashboard" is inoperative and shows nothing, no rpm, no volts, no af, all values are blank. What am I missing here, show my the error of my ways
Thanks much in advance

 

final5-0

Mustang Master

Apr 6, 2003

6,817

12

79

DFW Texas

Dec 14, 2008

#2

• Dec 14, 2008

• #2

Hey Charlie

I'm not all that familiar with the newer software used these days

Hopefully Greg, Wes or some of the other Tweecer users will chime in here

The old .org tuning site used to have an installation issue forum

Maybe you could find a quick answer there

Good Luck and welcome to the self tuning community

Grady

 

legalize420

Active Member

May 21, 2005

1,541

1

37

South Florida

Dec 14, 2008

#3

• Dec 14, 2008

• #3

when you click read do you see the progress bar move? for the datalog part you need to go into utilites and select the payloads you want to datalog. after that you need to re-write to the tweecer before it will work.

 

legalize420

Active Member

May 21, 2005

1,541

1

37

South Florida

Dec 14, 2008

#4

• Dec 14, 2008

• #4

also, make sure you are using the cbaza strategy

 

C

Charlie Allen

15 Year Member

Jan 7, 2008

60

0

7

Dec 15, 2008

#5

• Dec 15, 2008

• #5

Thanks for the quick response boys.

"when you click read do you see the progress bar move? for the datalog part you need to go into utilites and select the payloads you want to datalog. after that you need to re-write to the tweecer before it will work"

The progress bar does move.................I went to utilities and selected ALL of functions to datalog....................I can't seem to write in back to the tweecer...................

"also, make sure you are using the cbaza strategy"

The program will only take the L9 or 9 something strategy, it will not let me change to the cbaza strategy.

 

legalize420

Active Member

May 21, 2005

1,541

1

37

South Florida

Dec 15, 2008

#6

• Dec 15, 2008

• #6

when you go to utilites you need to choose the payloads on the right side of the screen. not the functions. you should only be able to pick 15 or 16. you wont be able to select all. look at the bottom of the screen and you will see strategy. change that to cbaza and re-write everything to the tweecer and you should be good to go.

 

Guero

Active Member

Oct 11, 2005

2,148

0

47

Dec 15, 2008

#7

• Dec 15, 2008

• #7

What I did Is read the off setting and birnt them all to the rest of the settings.

 

C

Charlie Allen

15 Year Member

Jan 7, 2008

60

0

7

Dec 15, 2008

#8

• Dec 15, 2008

• #8

Thanks to Legalize 420, changing the strategy to CBAZA cured all of my problems. I wrote the Ford settings to all 4 of the switch positions. Tomorrow I will datalog and make a few,"very few" changes and head back to track on Thursday if this rain quits.
Thanks to all again,
Charlie