Is it possible to get a 427 stroker emissions legal?

If the short block is in good shape

If the cam is not too radical

If the tune has been optimized

If all emissions equipment is in place

I'd have to say ... Very Possible

I am only talking passing with good specs from the emissions test

I am NOT talking about a visual which could fail you because of
something as simple as you used LT's

Grady

+1 with grady. the main factor is the cam.

do they do visual inspections? in maryland, they only do the sniffer test on rollers for pre-1996 cars, so i have a chance to actually pass.

A thought or two for you based upon my experience

I run A L L emissions equipment and it is in good working order

I've passed the roller & visual emissions annual test in Texas for the
past several years now with the sig you see in the combo

My emissions tech guy told me the LT's would fail me in some other
states. He said they were told as long as all equipment is in place,
nothing has been capped or bypassed, and it all comes up with
clean burn results ... things such as LT's will not fail the vehicle

OK ... speaking about cams

My cam is sitting on a 109 lsa
which
Was just awful when I first fired it up

It would not idle at less than 1200 rpm
and
It burned your eyes big time from an over rich fuel ratio

My Tweecer allow me to make the tune very efficient
thus it has played a substantial part :Word:
in my ability to make it pass the emissions testing

Any more Q's ??? ... Feel Free to Ask

Grady

I do understand about a plan

Good Luck with yours

I'm sure you have heard .....

Plan Your Work and Work Your Plan

Grady