• Mustang Forums
  • 1974 - 1978 Mustang II Talk & Tech

Is this a fuel filter?

  • Thread starter Thread starter Dutch74
  • Start date Start date Oct 2, 2025
D

Dutch74

Member
Oct 2, 2025
3
1
13
Loveland, Colorado
Oct 2, 2025
#1
  • Oct 2, 2025
  • #1
Hey I just bought a 74 Mustang II, v6 engine. It’s been bogging down and occasionally dying too. I think it’s not getting enough fuel.
I would think the fuel pump would either be okay or dead, not like this where it’s kinda okay. I have fresh fuel with BG44k added.
I went to change the fuel filter and don’t see one at all. This has an aftermarket Weber carburetor. I was going to add one to the line and found this odd non-replaceable thing on the fuel line. Like a short cigar. Is this a filter or something else? If it’s a filter could it be clogged and causing the issue? Photo attached.
Thanks guys! And I’m new to owning classic cars so any advice would be helpful!
 

Attachments

  • IMG_2874.webp
    78 KB · Views: 50
  • IMG_2873.webp
    76.7 KB · Views: 56

LILCBRA

I wish I didn't have all of these balls in the air
Mod Dude
Dec 6, 2005
6,339
5,313
194
Corn County USA
Oct 2, 2025
#2
  • Oct 2, 2025
  • #2
Welcome to !

It does kinda look like a filter..... I'd say that if it's spliced into your fuel lines that it most likely is, or it's some kind of check valve, but a filter seems more likely. A new filter isn't all that expensive, I'd say get yourself a new one and replace it and see where you end up.

Oh.... and before the hordes see your post and start badgering you - post up some pics of the car! Everyone likes to see them.
 
D

Dutch74

Member
Oct 2, 2025
3
1
13
Loveland, Colorado
Oct 2, 2025
#3
  • Oct 2, 2025
  • #3
Ok thanks! I'd have to cut off the metal for it so it seems like it wasn't meant to be replaced like a normal fuel filter, but there isn't anything else for a fuel filter...
 

LILCBRA

I wish I didn't have all of these balls in the air
Mod Dude
Dec 6, 2005
6,339
5,313
194
Corn County USA
Oct 2, 2025
#4
  • Oct 2, 2025
  • #4
While it's not exacty like what you have, here's another inline filter to illustrate. They're meant to be r/r'ed, not serviced with a new element.





I'd suggest picking one up like this one so you can at least see what you may be working with.






I'd avoid the filters that you can take apart only because it's another potential point of leakage.
 
Reactions: DadLife0724

gkomo

now i can hopefully expect to receive the shaft
Aug 2, 2024
2,138
1,382
133
San Diego, CA
Oct 3, 2025
#5
  • Oct 3, 2025
  • #5
Can you try to find a P/N stamped on that thing? Either way it looks like the lines aren't fully over the metal tubing they connect to.
 

welder4956

20+ Year Stangneter
Nov 28, 2003
228
89
38
Birmingham, AL
Oct 4, 2025
#6
  • Oct 4, 2025
  • #6
Dutch74 said:
Hey I just bought a 74 Mustang II, v6 engine. It’s been bogging down and occasionally dying too. I think it’s not getting enough fuel.
I would think the fuel pump would either be okay or dead, not like this where it’s kinda okay. I have fresh fuel with BG44k added.
I went to change the fuel filter and don’t see one at all. This has an aftermarket Weber carburetor. I was going to add one to the line and found this odd non-replaceable thing on the fuel line. Like a short cigar. Is this a filter or something else? If it’s a filter could it be clogged and causing the issue? Photo attached.
Thanks guys! And I’m new to owning classic cars so any advice would be helpful!
Click to expand...
The part in your photo is not a fuel filter, it is part of the fuel vapor return (9G271). The fuel filter originally would have been threaded into the carb, item 9155 in the photo below. It may have been left off when the Weber carb was installed or replaced with one like shown in above posts.







The replacement filter looks like this:

 
Last edited: Oct 5, 2025
Reactions: LILCBRA
D

Dutch74

Member
Oct 2, 2025
3
1
13
Loveland, Colorado
Oct 19, 2025
#7
  • Oct 19, 2025
  • #7
welder4956 said:
The part in your photo is not a fuel filter, it is part of the fuel vapor return (9G271). The fuel filter originally would have been threaded into the carb, item 9155 in the photo below. It may have been left off when the Weber carb was installed or replaced with one like shown in above posts.







The replacement filter looks like this:

Click to expand...
Thank you - that's it! I appreciate the help, it's defintely the fuel vapor return. I'm guessing this is a smog prevention design, but not to prevent vapor lock or it would be closer to the carb.
 
Reactions: welder4956

welder4956

20+ Year Stangneter
Nov 28, 2003
228
89
38
Birmingham, AL
Oct 21, 2025
#8
  • Oct 21, 2025
  • #8
Dutch74 said:
Thank you - that's it! I appreciate the help, it's defintely the fuel vapor return. I'm guessing this is a smog prevention design, but not to prevent vapor lock or it would be closer to the carb.
Click to expand...
Yes, I would leave it in place and not try to remove it. At least it is removing some of the vapor that could cause a vapor lock.
 
You must log in or register to reply here.

Similar threads

L
1997 V6 Starting issue
  • leanzik04
  • Mar 20, 2026
  • SN95 V6 Mustang Tech
Replies
3
Views
212
SN95 V6 Mustang Tech Mar 20, 2026
Noobz347
D
Fuel Erratic Fuel Pressure 1985 GT
  • DienstXIV
  • Jan 14, 2026
  • Fox 5.0 Mustang Tech
Replies
16
Views
631
Fox 5.0 Mustang Tech Jan 16, 2026
AeroCoupe
F
2004 Mustang GT – Fuel Pump Not Priming
  • Fayio
  • Apr 22, 2026
  • SN95 4.6L Mustang Tech
Replies
7
Views
195
SN95 4.6L Mustang Tech Apr 27, 2026
n0v8or
N
Fox Fuel Pump Issues After Replacement/Upgrade
  • Ryu
  • Tuesday at 4:42 PM
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
13
Views
185
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Saturday at 10:29 AM
AeroCoupe
Zero fuel pressure @ Shrader, but over 100 PSI at filter
  • Stang337
  • Jul 5, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
5
Views
362
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 10, 2025
JD1964
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1974 - 1978 Mustang II Talk & Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?