Is this possible?

[stprorolla49]

Well last time at the track, i ran a best of 14.25@95 with a 1.99 60', and i really wanna hit 13's. You think its possible to hit high 13's on a set of 275 Nitto dr's?? And what RPM should a launch at on those bad boys?? Thanks guys

 

[SWYZ721]

With that MPH it would be awful hard. The 60 you'd have to cut would be amazing

Headers would greatly improve your chances.

On that note, typically what MPH do you need for 13s? With our motors of course.

 

[BlueOvalStangGT]

Skip headers, do an Intake manifold and pullies, that with DR's will put you in the 13's. Back when I ran 13s, I think my best was a 13.86 at 99.5. Back then I had a midpipe, catback, dr's, cobra intake, pullies and maybe subframes. For the nittos, be sure to do a good burnout and lower tire pressure to about 17-18psi. I launch at a wimpy 3-4k and featherd the clutch.

 

[stprorolla49]

Skip headers, do an Intake manifold and pullies, that with DR's will put you in the 13's. Back when I ran 13s, I think my best was a 13.86 at 99.5. Back then I had a midpipe, catback, dr's, cobra intake, pullies and maybe subframes. For the nittos, be sure to do a good burnout and lower tire pressure to about 17-18psi. I launch at a wimpy 3-4k and featherd the clutch.

thanks kev...i'd really love to get into the 13's by just adding dr's and 3.73's....im sure its possible...i also think im gonna try and find some used pulleys also...

 

[Grn92LX]

Yes with dr's and gears your goals are VERY easy.