Iso 1975 302 Frame Mounts

WalterE · Dec 22, 2017

I'm buying a 302 and a c4 auto trans out of a 1978 mustang II but the guy got the engine from a friend and doesn't have the frame mounts, and I can't find anyone that sells them. My car is a 1975 factory 302 car that a previous owner put a 191 (2.8L) v6 in it has a c4 currently in it so I'm hoping the trans will mount up the same.

Suidriver · Dec 23, 2017

Where are you located? I have a couple of V8 parts cars (rolling chassis) here in Southern Michigan, and I think one of them might still have the frame mounts. The engine mounts are usually the hard part to find, so I hope you have those! As for the trans, you will need to use the V8 trans but it will bolt onto the cross-members the same. (The bell housings are WAY different, ditto flywheels/convertors)

Noobz347 · Dec 23, 2017

@74stang2togo

Not sure this goes here.

WalterE said:
I'm buying a 302 and a c4 auto trans out of a 1978 mustang II but the guy got the engine from a friend and doesn't have the frame mounts, and I can't find anyone that sells them. My car is a 1975 factory 302 car that a previous owner put a 191 (2.8L) v6 in it has a c4 currently in it so I'm hoping the trans will mount up the same.

Is this a question or are you trying to purchase a part?

Adieu · Dec 23, 2017

Noobz347 said:
@74stang2togo

Not sure this goes here.

Is this a question or are you trying to purchase a part?

Moved with redirect, looks like both, but with an emphasis on trying to locate a source.

Bstang71 from MustangII.net buys and sells V8 frame mounts, motor mounts, and rebuild kits for the motor mounts. Unfortunately, MustangII.net seems to be permanently gone, and I'm not sure I still have his contact info. I'll look tonight and let you know.

WalterE · Dec 26, 2017

I would like to buy a set or know if anyone has a source to buy new/refurbed. I'm located in Canada, B.C so parts cars are few and far between usually. I followed your previous comment on someones post about the bstang71 guy but the forum was close and redirected

StadEMS3 · Dec 27, 2017

bstang71 is Brett McHugh. He's on Facebook and sells rebuild kits through http://www.sscenterprises.net/4images/details.php?image_id=153 Sometimes he has mounts on hand. You can also check with Phil Schmidt of Mustang II Specailty Shop 334 298-3038, also on FB. Facebook Mustang II groups have a lot of connections. I miss the old MustangII.net site but it seams like everyone is moving to social media now...

Adieu · Dec 27, 2017

StadEMS3 said:
I miss the old MustangII.net site but it seams like everyone is moving to social media now...

If it was somewhere other than Facebook I'd stay in touch. I don't do Facebook for a whole host of reasons.

429MII · Mar 11, 2019

this ad is old but I am in B.C Canada and I have both frame mounts for a 302 that I'm not using

Iso 1975 302 Frame Mounts

WalterE

New Member

Suidriver

Member

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor

Adieu

Easy there, this ain't a dating site.

WalterE

New Member

StadEMS3

Adieu

Easy there, this ain't a dating site.

429MII

Similar threads

Iso 1975 302 Frame Mounts

New Member

Member

Stangnet Facilities Maint Tech... Er... Janitor

Easy there, this ain't a dating site.

New Member

Easy there, this ain't a dating site.

Similar threads

Privacy & Transparency

Privacy & Transparency