Jba Header Stangnet Group Purchase

MRaburn · Sep 6, 2005

OK folks... we have made arrangements to offer StangNet members a great deal on a set of JBA Headers for the 99-04 Mustang 2Valves...

http://www.partshopper.com/shop/JBA-Mustang-Header-2V-99-04-m290.html

That is the page for detailed info on the headers, we need to get at least 15 0rders to get em out the door and on the way.

Anyone shopping for these can tell you this is an outstanding price on the headers offered from JBA, and we all know the quality is top notch.

If you are in, please order on the Partshopper site and we will keep all the orders held (won't charge cards) until we know we get the go and start shipping.

JBA has authorized this sale for StangNet members... so get in now while we can offer them this low.

1625S-1 Stainless Steel 99-04 2V Mustang GT $459.99

1625S-1JS Silver Ceramic 99-04 2V Mustang GT $599.99

1625S-1JT Titanium Ceramic 99-04 2V Mustang GT $599.99

http://www.partshopper.com/shop/JBA-Mustang-Header-2V-99-04-m290.html

Cheers
Mike

mrvax · Sep 6, 2005

There are "shorty" headers, correct?

MRaburn · Sep 6, 2005

Yes these are the shorty headers.

Sid3ways S13 · Sep 6, 2005

What sort of gains are expected from these? Of course other mods will affect that but I'd like to hear experiences with a bone stock car and also a car that is blown like mine. Anyone care to estimate how much these will help me?

I'm just a little leary as the new GTO crowd has unanimously given a to the JBA Shorties for our cars.

streetstang03 · Sep 6, 2005

we want LTs!!!

i <3 u MRaburn

mrvax · Sep 7, 2005

I've seen tests that SHM did on shortys on a N/A 4.6L. They picked up about 4rwhp. Personally I'd perfer L/T's but then have to worry about passing inspection.

NasaGT · Sep 7, 2005

I've seen a couple dyno pulls on modded cars with the usual bolt ons that resulted in 8-10 rwhp. On a stock car you will only see 4-5rwhp as stated by mrvax. In S/C'd applications these do much better, large gains can be had there. Not as much as LTs but close.

I am very happy with my JBAs.

Sid3ways S13 · Sep 7, 2005

NasaGT said:
In S/C'd applications these do much better, large gains can be had there. Not as much as LTs but close.

Are we talking 10-15 whp or 15-35 whp?

Rocketman · Sep 7, 2005

I got 5 RWHP and 7 lb/ft of torque from my BBK tuned length shorty's. I would say the JBA's would be close to the same.

VividDreams · Sep 7, 2005

Rocketman, was that before or after your ProChamber? Thanks

'13_ImpactBlue_GT · Sep 7, 2005

Will they bolt up to all x/h-pipes or just certain ones?

joshheat25 · Sep 8, 2005

umm why are other sites cheaper than this???

Disturbed One · Sep 9, 2005

I'd say I might but they don't make any headers for my car so their tech line says. 97 GT? They said my car has air induction on the manifolds.... smog pump? But yet I don't see anything hooked up on the front of the manifolds. I've also read that my car for the transmission is mechanical while it's hooked up electronically for the speedo.

joshheat25 · Sep 9, 2005

Aren't Headers a B#tch to install! how much in labor?

ADRENLN · Sep 12, 2005

yea jba's are like 500 bucks other places.

YardSpecial · Sep 13, 2005

How do I log into the site, my old account got dumped.............

Did not see a re-registor link.

MRaburn · Sep 22, 2005

Cavallo, You have to follow the Sign In link to create a new account.

And for the guys saying they find it cheaper, I suspect that in high doubt, as these prices are WAY below Jobber.

Cheers
Mike

YardSpecial · Sep 23, 2005

Have my order in:

1625S-1JT Titanium Ceramic 99-04 2V Mustang GT $599.99

Going on the 2002 GT Vert

twogts4us · Sep 23, 2005

Rocketman said:
I got 5 RWHP and 7 lb/ft of torque from my BBK tuned length shorty's. I would say the JBA's would be close to the same.

Unfortunately, these JBAs aren't tuned (equal) length.
Seems like a high price and still alot of effort for minimal gain...I'd just take the plunge and do long tubes. While the labor is probably a bit more, the potential gain is also much greater. BBK long tubes, probably the most popular for the SN-95, are available in ceramic coated for under $500. Add a cheap, short midpipe for about $170, and you're ready to roll. I've been hearing a lot more people stating a tune is really needed to take advantage of the long tubes though...something you might want to pencil into your budget...I am adding it to mine (no sense in spending the coin to buy and have em installed, then be disappointed).

h0tr0d · Sep 28, 2005

I'm just a little leary as the new GTO crowd has unanimously given a to the JBA Shorties for our cars.[/QUOTE]

Looks like the GTO owners are loving the power of the JBA Shorties.

http://www.ls1gto.com/forums/showthread.php?t=40003&highlight=jba+headers

Jba Header Stangnet Group Purchase

MRaburn

Founder

mrvax

Stay thirsty my friends

MRaburn

Founder

Sid3ways S13

streetstang03

unModerator

mrvax

Stay thirsty my friends

NasaGT

Sid3ways S13

Rocketman

New Member

VividDreams

New Member

'13_ImpactBlue_GT

Angry Little Elf

joshheat25

Member

Disturbed One

New Member

joshheat25

Member

ADRENLN

Active Member

YardSpecial

New Member

MRaburn

Founder

YardSpecial

New Member

twogts4us

h0tr0d

New Member

Similar threads

Jba Header Stangnet Group Purchase

Founder

Stay thirsty my friends

Founder

unModerator

Stay thirsty my friends

New Member

New Member

Angry Little Elf

Member

New Member

Member

Active Member

New Member

Founder

New Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency