- Jun 24, 2015
- 5
- 0
- 1
New member here. I just picked up a 1986 mustang gt for a fun summer car. The guy who i bought it from seemed legit and really cared for the car. He put a lot of work in the car and threw in a lot of tasteful mods. Heres the list...
New O.E Replacement parts that he replaced...
Alternator
Starter
New stainless steal Gas Tank with filler neck gasket
1987 EFI fuel sending unit and gasket
AC Delco spark plugs and 8mm Motorcraft Wires
MSD cap and rotor
Timing Cover (refurbished)
Ford Performance Timing Chain and cam gear and crank timing gear
Head Gaskets and new bolts
Valve Cover Gaskets
Upper and lower intake gaskets
Rear Springs O.E. stock ride height
Front springs O.E.
Front Left and Right flex brake lines
Front Tires: Bridgestone Insignia (directional and +1 size)
Front shocks: Senseatrack
Rear shocks: Senseatrack
Rear outer and inner axle seals
P.S. Rack and Pinion and hoses
New serp. belt.
New heater core
All new O2 sensors and wire pig tails
Aftermarket Performance Mods:
High Flow fuel pump from BBK
High output MSD Ignition coil and lead wire
Rear Ring Gear: new 8.8" 4:10 Gears with carbon fiber clutch packs and spacers (Posi)
Speedometer gear for 4:10 gears, [speedo still -10mph (slower)]
Rear Tires: Firehawk Indy 500 NEW
Rear Drag Control Arms (+1" Height) Southside machine
Ford Racing B303 Cam Hydraulic Roller Tappet 3300 5100 284° 0.480"
Distributor was advanced to +14 deg. For B-Cam
Smog Pump Delete performed
P.S Steering Pump relocated
A/C delete pulley and bracket
Converted to Mass Air flow
Converted to 1989 PCM
Cold Air Intake from BBK with cone filter
Heavy Duty T5 transmission with a forged input shaft, all new gears and spacers, heavy duty stainless steal synchromesh gears
Stage 3 power ram clutch good for 600hp/600ft lbs torque
Pro 5.0 Short Shifter and needed gaskets. W/Shift Knob
Steeda heavy duty sub frame connectors w/seat brackets, welded on(professionally)
Aluminum duel core radiator with twin 12" electric fans, programmable
All silicone coolant hoses and new high pressure worm clamps
BBK shorty headers 2.5"
BBK off road "h" pipe 2.5"
All stainless steel exhaust 2.5" h-pipe back
Here are some pics.
I love driving this car!! It sounds amazing. All i wanted was a V8 RWD car with a stick so thats why i bought it. These mustangs are a great bang for the buck.
I'm new to the fox body world so i don't really know much. Thats why i'm on here to learn.
The car drives really good and runs great. I do have a few issues though.
1. The brakes suck. It seems like these cars were just made that way. super squishy pedal.
2. MORE POWER!! Does anybody have a recommendation for heads that will work good with my set up? maybe larger injectors? basically whats the next step? It seems like there are a lot of good supporting mods already installed.
3. The "stinkbug" look. I don't know how he "added" 1"... the southside arms? Thinking about either cutting the stock rear springs(Ghetto) or buying aftermarkets. don't want to spend the money on coil overs.
4. WHEEL HOP!! This think hooks up good, but when it starts to slip its like theres an earthquake happening. I want to be able to lay rubber down the street without hop.
5. Its got a high speed vibration directly underneath the car, not a wheel bearing. seems like the driveshaft. Out of balance? pinion angle?
6. Theres no key... and the ignition is trashed from a screwdriver. Looking to buy another column with a key.
8. And of course, Body work... not too worried about it.
My main concerns are wheel hop, stinkbug look, and more power.
Any Input is greatly appreciated. What you would do, what you think, etc. Thanks!
New O.E Replacement parts that he replaced...
Alternator
Starter
New stainless steal Gas Tank with filler neck gasket
1987 EFI fuel sending unit and gasket
AC Delco spark plugs and 8mm Motorcraft Wires
MSD cap and rotor
Timing Cover (refurbished)
Ford Performance Timing Chain and cam gear and crank timing gear
Head Gaskets and new bolts
Valve Cover Gaskets
Upper and lower intake gaskets
Rear Springs O.E. stock ride height
Front springs O.E.
Front Left and Right flex brake lines
Front Tires: Bridgestone Insignia (directional and +1 size)
Front shocks: Senseatrack
Rear shocks: Senseatrack
Rear outer and inner axle seals
P.S. Rack and Pinion and hoses
New serp. belt.
New heater core
All new O2 sensors and wire pig tails
Aftermarket Performance Mods:
High Flow fuel pump from BBK
High output MSD Ignition coil and lead wire
Rear Ring Gear: new 8.8" 4:10 Gears with carbon fiber clutch packs and spacers (Posi)
Speedometer gear for 4:10 gears, [speedo still -10mph (slower)]
Rear Tires: Firehawk Indy 500 NEW
Rear Drag Control Arms (+1" Height) Southside machine
Ford Racing B303 Cam Hydraulic Roller Tappet 3300 5100 284° 0.480"
Distributor was advanced to +14 deg. For B-Cam
Smog Pump Delete performed
P.S Steering Pump relocated
A/C delete pulley and bracket
Converted to Mass Air flow
Converted to 1989 PCM
Cold Air Intake from BBK with cone filter
Heavy Duty T5 transmission with a forged input shaft, all new gears and spacers, heavy duty stainless steal synchromesh gears
Stage 3 power ram clutch good for 600hp/600ft lbs torque
Pro 5.0 Short Shifter and needed gaskets. W/Shift Knob
Steeda heavy duty sub frame connectors w/seat brackets, welded on(professionally)
Aluminum duel core radiator with twin 12" electric fans, programmable
All silicone coolant hoses and new high pressure worm clamps
BBK shorty headers 2.5"
BBK off road "h" pipe 2.5"
All stainless steel exhaust 2.5" h-pipe back
Here are some pics.
I love driving this car!! It sounds amazing. All i wanted was a V8 RWD car with a stick so thats why i bought it. These mustangs are a great bang for the buck.
I'm new to the fox body world so i don't really know much. Thats why i'm on here to learn.
The car drives really good and runs great. I do have a few issues though.
1. The brakes suck. It seems like these cars were just made that way. super squishy pedal.
2. MORE POWER!! Does anybody have a recommendation for heads that will work good with my set up? maybe larger injectors? basically whats the next step? It seems like there are a lot of good supporting mods already installed.
3. The "stinkbug" look. I don't know how he "added" 1"... the southside arms? Thinking about either cutting the stock rear springs(Ghetto) or buying aftermarkets. don't want to spend the money on coil overs.
4. WHEEL HOP!! This think hooks up good, but when it starts to slip its like theres an earthquake happening. I want to be able to lay rubber down the street without hop.
5. Its got a high speed vibration directly underneath the car, not a wheel bearing. seems like the driveshaft. Out of balance? pinion angle?
6. Theres no key... and the ignition is trashed from a screwdriver. Looking to buy another column with a key.
8. And of course, Body work... not too worried about it.
My main concerns are wheel hop, stinkbug look, and more power.
Any Input is greatly appreciated. What you would do, what you think, etc. Thanks!